Rear Door Speaker Installation

Body Electrical. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Audio Visual. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. INSTALL REAR NO. 1 SPEAKER ASSEMBLY

  2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

  3. INSTALL REAR DOOR ARMREST BASE UPPER PANEL LH

  4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Rear Door Speaker -- Installation


HINT:
  1. Use the same procedure for the RH side and LH sides.
  2. The procedure listed below are for the LH side.


1. INSTALL REAR NO. 1 SPEAKER ASSEMBLY


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Using an air riveter or hand riveter, install the speaker with 3 new rivets.

    NOTICE:

    1. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Audio Visual.Audio And Visual System.Rear Door Speaker Installation
      Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

    2. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Audio Visual.Audio And Visual System.Rear Door Speaker Installation
      Confirm that the rivets are seated properly against the speaker.
    3. Do not tilt the riveter when installing the rivet to the speaker.
    4. Do not leave any space between the rivet head and speaker.

    5. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Audio Visual.Audio And Visual System.Rear Door Speaker Installation
      Do not leave any space between the speaker and door. Firmly hold together the 2 items while installing the rivet.

  1. Connect the connector.



2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH

  1. Attach the 6 claws to install the weatherstrip inner.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Attach the 2 claws to install the inside handle.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Audio Visual.Audio And Visual System.Rear Door Speaker Installation

  1. for 8 Clip Type:
    Attach the 8 clips to install the trim board.

  1. for 7 Clip Type:
    Attach the 7 clips to install the trim board.

  1. Install the 3 screws.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Attach the 3 claws to install the door inside handle bezel plug.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Attach the 12 claws to install the door assist grip cover.



3. INSTALL REAR DOOR ARMREST BASE UPPER PANEL LH


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Attach the 2 claws and install the power window regulator switch to the panel.

  1. Connect the switch connector.



    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. Attach the clip and 5 claws to install the panel (with the switch).



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL