Electronic Power Steering System Dtc Check / Clear

Steering. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35
Power Steering. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35

  1. CHECK DTC

  1. CLEAR DTC

Electronic Power Steering System -- Dtc Check / Clear



CHECK DTC


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Power Steering.Steering Gear.Electronic Power Steering System Dtc Check / Clear

  1. When using intelligent tester:

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch on (IG) and press the intelligent tester main switch ON.

    3. Read the DTCs by following the prompts on the intelligent tester.

      HINT:
      Refer to the intelligent tester operator's manual for further details.


    2. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Power Steering.Steering Gear.Electronic Power Steering System Dtc Check / Clear

  2. When not using intelligent tester:

    1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

      SST
      09843-18040

    2. Turn the ignition switch on (IG).



    3. Read and write down any DTCs indicated by the P/S warning light on the combination meter. Refer to the chart below for examples of a normal code and DTCs 21 and 22.


      Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Power Steering.Steering Gear.Electronic Power Steering System Dtc Check / Clear

      HINT:
      1. If the P/S warning light does not blink to display any DTCs set or the normal code, inspect the circuit shown in the table below.
        Trouble Area
        		See procedure
        EPS warning light circuit
        		RAV4_ACA30 RM000001T0D00DX.html
      2. If 2 or more malfunctions are detected simultaneously, DTCs will be displayed in ascending numerical order.

    4. Refer to the Diagnostic Trouble Code Chart (RAV4_ACA30 RM000001T0900DX.html) for DTC information.



    3. Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Power Steering.Steering Gear.Electronic Power Steering System Dtc Check / Clear

  3. w/ Multi-information Display
    When not using intelligent tester:

    1. Using SST, connect terminals 13 (TC) and 4 (CG) of the DLC3.

      SST
      09843-18040

    2. Turn the ignition switch on (IG).

    3. Press the combination meter display switch to display the P/S column in the multi-display. DTCs will be output in the multi-display.

      HINT:
      When normal, the following are displayed: FF (for when there are no past malfunctions); and EE (for when there are past malfunctions).

CLEAR DTC


    Toyota Rav4. Aca30, 33, 38 Gsa33 Zsa30, 35.Power Steering.Steering Gear.Electronic Power Steering System Dtc Check / Clear

  1. When using intelligent tester:

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch on (IG) and press the intelligent tester main switch ON.

    3. Clear the DTCs by following the prompts on the intelligent tester.

    4. Turn the ignition switch off.

    5. Disconnect the intelligent tester from the DLC3.

  2. When not using intelligent tester:

    1. Using SST, connect terminals 12 (TS) and 4 (CG) of the DLC3.

      SST
      09843-18040

    2. Turn the ignition switch on (IG).

    3. Disconnect SST from terminal 4 (CG) and reconnect it, and repeat this procedure 4 times or more within 8 seconds.

    4. Check that the P/S warning light blinking pattern is the normal code.

    5. Turn the ignition switch off.

    6. Remove SST from the DLC3.