Skid Control Buzzer Removal

Brake. Lexus Is250, Is220D. Gse20 Ale20
Brake Control. Lexus Is250, Is220D. Gse20 Ale20

  1. PRECAUTION

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  3. REMOVE SIDE INSTRUMENT PANEL LH

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

  5. REMOVE LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY

  6. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY

  7. REMOVE SKID CONTROL BUZZER ASSEMBLY

Skid Control Buzzer -- Removal



1. PRECAUTION
CAUTION:
Be sure to read the "PRECAUTION" thoroughly before servicing (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to prevent the airbag working.


3. REMOVE SIDE INSTRUMENT PANEL LH


    Lexus Is250, Is220D. Gse20 Ale20
  1. Using a moulding remover, disengage the 5 claws and 3 clips, and then remove the side instrument panel LH.



4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    Lexus Is250, Is220D. Gse20 Ale20.Brake Control.Vehicle Stability Control System (W/ Vdim).Skid Control Buzzer  Removal
  1. Remove the 2 screws <E>.

  1. Push the 2 claws in the direction indicated by the arrow to disengage them.

  1. Remove the No. 1 instrument panel under cover sub-assembly from the guide as shown in the illustration and pull the cover toward the rear of the vehicle.

  1. Disconnect the connectors and remove the No. 1 instrument panel under cover sub-assembly.



5. REMOVE LOWER INSTRUMENT FINISH PANEL SUB-ASSEMBLY


    Lexus Is250, Is220D. Gse20 Ale20
  1. Disengage the 7 clips.

  1. Disconnect the connectors and remove the lower instrument panel finish panel sub-assembly.



6. REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY


    Lexus Is250, Is220D. Gse20 Ale20
  1. Remove the 4 bolts and driver side knee airbag assembly.

  1. Disconnect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.


7. REMOVE SKID CONTROL BUZZER ASSEMBLY


    Lexus Is250, Is220D. Gse20 Ale20
  1. Remove the clip and skid control buzzer assembly.