REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat)
REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat)
Curtain Shield Airbag Assembly -- Removal |
- HINT:
- Use the same procedure for the RH and LH sides.
- The procedure listed below is for the LH side.
| 1. REMOVE ROOF HEADLINING ASSEMBLY |
for 5 Door:
Remove the roof headlining assembly (LandCruiser RM0000046JL02NX.html).
for 3 Door:
Remove the roof headlining assembly (LandCruiser RM0000046JQ00WX.html).
| 2. REMOVE NO. 2 AIR DUCT REAR SIDE (w/ Rear Cooler) |
Detach the 2 clips.
 |
Detach the clamp and remove the duct.
| 3. REMOVE NO. 1 AIR DUCT REAR SIDE (w/ Rear Cooler) |
Detach the 2 claws and remove the cooler plate.
 |
Swing the bottom of the duct sideways and remove the duct.
 |
| 4. REMOVE REAR NO. 2 SIDE RAIL SPACER LH (for 3 Door) |
 |
Remove the clip.
Detach the 4 claws and remove the rear side rail spacer.
| 5. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/o Rear No. 2 Seat) |
Disconnect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 13 bolts and curtain shield airbag.
| 6. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (w/ Rear No. 2 Seat) |
Disconnect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the 17 bolts and curtain shield airbag.
| 7. REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH (for 3 Door) |
Disconnect the connector.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
 |
Remove the 11 bolts and curtain shield airbag.
