Meter / Gauge System Fuel Receiver Gauge Malfunction


DESCRIPTION

WIRING DIAGRAM

INSPECTION PROCEDURE

CHECK FOR DTC

PERFORM ACTIVE TEST USING GTS (FUEL METER OPERATION)

CHECK VEHICLE TYPE

CHECK HARNESS AND CONNECTOR (FUEL GAUGE CIRCUIT)

INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

INSPECT FUEL SENDER GAUGE ASSEMBLY

INSPECT FUEL TANK VENT TUBE ASSEMBLY

INSPECT FUEL SENDER GAUGE ASSEMBLY

CHECK HARNESS AND CONNECTOR (FUEL GAUGE CIRCUIT)

INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

INSPECT FUEL TANK VENT TUBE ASSEMBLY

INSPECT FUEL SENDER GAUGE ASSEMBLY

INSPECT FUEL TANK VENT TUBE ASSEMBLY

INSPECT FUEL TANK VENT TUBE ASSEMBLY

INSPECT FUEL SENDER GAUGE ASSEMBLY

CHECK HARNESS AND CONNECTOR (FUEL GAUGE CIRCUIT)

INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY

INSPECT FUEL SENDER GAUGE ASSEMBLY

INSPECT FUEL TANK VENT TUBE ASSEMBLY

INSPECT FUEL SENDER GAUGE ASSEMBLY

METER / GAUGE SYSTEM - Fuel Receiver Gauge Malfunction


DESCRIPTION

The fuel sender gauge has a variable resistance mechanism. The resistance decreases when the fuel amount increases, and the resistance increases when the fuel amount decreases. The fuel receiver gauge changes based on the resistance of the fuel sender gauge.

WIRING DIAGRAM


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction


Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction


INSPECTION PROCEDURE

1.CHECK FOR DTC

  1. Check for DTCs (LandCruiser RM0000029Z907YX.html).

    Result
    Result
    		Proceed to
    DTC B1500 and B1501 is not output
    		A
    DTC B1500 is output
    		B
    DTC B1501 is output
    		C


B
GO TO B1500 (LandCruiser RM000002S2T0A9X.html)

C
GO TO B1501 (LandCruiser RM000003BUC00JX.html)
A


2.PERFORM ACTIVE TEST USING GTS (FUEL METER OPERATION)

  1. Using the GTS, perform the Active Test (LandCruiser RM0000012G70JTX.html).

    Combination Meter
    Tester Display
    		Test Part
    		Control Range
    		Diagnostic Note
    Fuel Meter Operation
    		Fuel receiver gauge
    		OFF, Sender, Empty, Warning, 1/ 4, 1/2, 3/4, Full or Sender F
    		-
    OK:
    Needle indication is normal.


NG
REPLACE COMBINATION METER ASSEMBLY (LandCruiser RM000003QKY01CX.html)
OK


3.CHECK VEHICLE TYPE

  1. Check the vehicle type.

    Result
    Result
    		Proceed to
    for 5 Door, Single Tank Type
    		A
    for 5 Door, Double Tank Type
    		B
    for 3 Door
    		C


B
Go to step 9

C
Go to step 16
A


4.CHECK HARNESS AND CONNECTOR (FUEL GAUGE CIRCUIT)

  1. Disconnect the G6 combination meter assembly connector.

  1. Disconnect the S5 fuel suction with pump and gauge tube assembly*1 or fuel tank vent tube assembly*2 connector.

    1. *1: for 1GR-FE, 2TR-FE
    2. *2: for 1KD-FTV, 1GD-FTV, 5L-E

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    G6-9 (L) - S5-2
    		Always
    		Below 1 Ω
    G6-24 (E) - S5-3
    		Always
    		Below 1 Ω
    G6-21 (E2) - Body ground
    		Always
    		Below 1 Ω
    G6-9 (L) or S5-2 - Body ground
    		Always
    		10 kΩ or higher
    G6-24 (E) or S5-3 - Body ground
    		Always
    		10 kΩ or higher
    Result
    Result
    		Proceed to
    OK (for 1GR-FE, 2TR-FE)
    		A
    OK (for 1KD-FTV, 1GD-FTV, 5L-E)
    		B
    NG
    		C


B
Go to step 7

C
REPAIR OR REPLACE HARNESS OR CONNECTOR
A


5.INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction

  1. Remove the fuel suction with pump and gauge tube assembly.

    1. for 1GR-FE: LandCruiser RM0000045LU00XX.html
    2. for 2TR-FE: LandCruiser RM0000045MB00UX.html

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A-2 - B-1
    		Always
    		Below 1 Ω
    A-3 - B-2
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Fuel Suction With Pump and Gauge Tube Assembly)
    *b
    		Lower side
    (to Fuel Sender Gauge Assembly)
    *c
    		Connector A
    *d
    		Connector B
    Result
    Result
    		Proceed to
    OK
    		A
    NG (for 1GR-FE)
    		B
    NG (for 2TR-FE)
    		C


B
REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (LandCruiser RM0000045LU00XX.html)

C
REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (LandCruiser RM0000045MB00UX.html)
A


6.INSPECT FUEL SENDER GAUGE ASSEMBLY

  1. Remove the fuel sender gauge assembly.

    1. for 1GR-FE: LandCruiser RM0000045LU00XX.html
    2. for 2TR-FE: LandCruiser RM0000045MB00UX.html

  1. Inspect the fuel sender gauge assembly.

    1. for 1GR-FE: LandCruiser RM0000045LS00TX.html
    2. for 2TR-FE: LandCruiser RM0000045M900PX.html
    Result
    Result
    		Proceed to
    OK
    		A
    NG (for 1GR-FE)
    		B
    NG (for 2TR-FE)
    		C


B
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045LU00XX.html)

C
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045MB00UX.html)
A

REPLACE COMBINATION METER ASSEMBLY (LandCruiser RM000003QKY01CX.html)

7.INSPECT FUEL TANK VENT TUBE ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction

  1. Remove the fuel tank vent tube assembly.

    1. for 1KD-FTV: LandCruiser RM0000045GP00ZX.html
    2. for 1GD-FTV: LandCruiser RM0000045GP010X.html
    3. for 5L-E: LandCruiser RM0000045K4009X.html

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A-2 - B-1
    		Always
    		Below 1 Ω
    A-3 - B-2
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Fuel Tank Vent Tube Assembly)
    *b
    		Lower side
    (to Fuel Sender Gauge Assembly)
    *c
    		Connector A
    *d
    		Connector B
    Result
    Result
    		Proceed to
    OK
    		A
    NG (for 1KD-FTV)
    		B
    NG (for 1GD-FTV)
    		C
    NG (for 5L-E)
    		D


B
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045GP00ZX.html)

C
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045GP010X.html)

D
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045K4009X.html)
A


8.INSPECT FUEL SENDER GAUGE ASSEMBLY

  1. Remove the fuel sender gauge assembly.

    1. for 1KD-FTV: LandCruiser RM0000045GP00ZX.html
    2. for 1GD-FTV: LandCruiser RM0000045GP010X.html
    3. for 5L-E: LandCruiser RM0000045K4009X.html

  1. Inspect the fuel sender gauge assembly.

    1. for 1KD-FTV: LandCruiser RM0000045GN00NX.html
    2. for 1GD-FTV: LandCruiser RM0000045GN00OX.html
    3. for 5L-E: LandCruiser RM0000045K2006X.html
    Result
    Result
    		Proceed to
    OK
    		A
    NG (for 1KD-FTV)
    		B
    NG (for 1GD-FTV)
    		C
    NG (for 5L-E)
    		D


B
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045GP00ZX.html)

C
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045GP010X.html)

D
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045K4009X.html)
A

REPLACE COMBINATION METER ASSEMBLY (LandCruiser RM000003QKY01CX.html)

9.CHECK HARNESS AND CONNECTOR (FUEL GAUGE CIRCUIT)

  1. Disconnect the G6 combination meter assembly connector.

  1. Disconnect the S5 fuel suction with pump and gauge tube assembly*1 or fuel tank vent tube assembly*2 connector.

    1. *1: except 5L-E
    2. *2: for 5L-E

  1. Disconnect the t1 fuel tank vent tube assembly connector.

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    G6-9 (L) - S5-2
    		Always
    		Below 1 Ω
    G6-24 (E) - S5-3
    		Always
    		Below 1 Ω
    G6-21 (E2) - Body ground
    		Always
    		Below 1 Ω
    G6-8 (L) - t1-4 (S)
    		Always
    		Below 1 Ω
    G6-23 (FE) - t1-5 (E)
    		Always
    		Below 1 Ω
    G6-21 (E2) - Body ground
    		Always
    		Below 1 Ω
    G6-9 (L) or S5-2 - Body ground
    		Always
    		10 kΩ or higher
    G6-24 (E) or S5-3 - Body ground
    		Always
    		10 kΩ or higher
    G6-8 (L) or t1-4 (S) - Body ground
    		Always
    		10 kΩ or higher
    G6-23 (FE) or t1-5 (E) - Body ground
    		Always
    		10 kΩ or higher
    Result
    Result
    		Proceed to
    OK (except 5L-E)
    		A
    OK (for 5L-E)
    		B
    NG
    		C


B
Go to step 13

C
REPAIR OR REPLACE HARNESS OR CONNECTOR
A


10.INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction

  1. Remove the fuel suction with pump and gauge tube assembly.

    1. for 1GR-FE: LandCruiser RM0000045M200BX.html
    2. for 2TR-FE: LandCruiser RM0000045MF00AX.html
    3. for 1KD-FTV: LandCruiser RM0000045GP00ZX.html
    4. for 1GD-FTV: LandCruiser RM0000045GL00AX.html

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A-2 - B-1
    		Always
    		Below 1 Ω
    A-3 - B-2
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Fuel Suction With Pump and Gauge Tube Assembly)
    *b
    		Lower side
    (to Fuel Sender Gauge Assembly)
    *c
    		Connector A
    *d
    		Connector B
    Result
    Result
    		Proceed to
    OK
    		A
    NG (for 1GR-FE)
    		B
    NG (for 2TR-FE)
    		C
    NG (for 1KD-FTV)
    		D
    NG (for 1GD-FTV)
    		E


B
REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (LandCruiser RM0000045M200BX.html)

C
REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (LandCruiser RM0000045MF00AX.html)

D
REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (LandCruiser RM0000045GL009X.html)

E
REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (LandCruiser RM0000045GL00AX.html)
A


11.INSPECT FUEL TANK VENT TUBE ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction

  1. Remove the fuel tank vent tube assembly.

    1. for 1GR-FE: LandCruiser RM0000045M200BX.html
    2. for 2TR-FE: LandCruiser RM0000045MF00AX.html
    3. for 1KD-FTV: LandCruiser RM0000045GL009X.html
    4. for 1GD-FTV: LandCruiser RM0000045GL00AX.html

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    4 (S) - 1
    		Always
    		Below 1 Ω
    5 (E) - 2
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Fuel Tank Vent Tube Assembly
    *b
    		Component without harness connected
    (Fuel Tank Vent Tube Assembly)
    Result
    Result
    		Proceed to
    OK
    		A
    NG (for 1GR-FE)
    		B
    NG (for 2TR-FE)
    		C
    NG (for 1KD-FTV)
    		D
    NG (for 1GD-FTV)
    		E


B
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045M200BX.html)

C
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045MF00AX.html)

D
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045GL009X.html)

E
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045GL00AX.html)
A


12.INSPECT FUEL SENDER GAUGE ASSEMBLY

  1. Remove the fuel sender gauge assembly.

    1. for 1GR-FE: LandCruiser RM0000045M200BX.html
    2. for 2TR-FE: LandCruiser RM0000045MF00AX.html
    3. for 1KD-FTV: LandCruiser RM0000045GL009X.html
    4. for 1GD-FTV: LandCruiser RM0000045GL00AX.html

  1. Inspect the fuel sender gauge assembly.

    1. for 1GR-FE: LandCruiser RM0000045M0008X.html
    2. for 2TR-FE: LandCruiser RM0000045MD008X.html
    3. for 1KD-FTV: LandCruiser RM0000045GJ006X.html
    4. for 1GD-FTV: LandCruiser RM0000045GJ007X.html
    Result
    Result
    		Proceed to
    OK
    		A
    NG (for 1GR-FE)
    		B
    NG (for 2TR-FE)
    		C
    NG (for 1KD-FTV)
    		D
    NG (for 1GD-FTV)
    		E


B
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045M200BX.html)

C
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045MF00AX.html)

D
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045GL009X.html)

E
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045GL00AX.html)
A

REPLACE COMBINATION METER ASSEMBLY (LandCruiser RM000003QKY01CX.html)

13.INSPECT FUEL TANK VENT TUBE ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction

  1. Remove the fuel tank vent tube assembly (LandCruiser RM0000045K4009X.html).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A-2 - B-1
    		Always
    		Below 1 Ω
    A-3 - B-2
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Fuel Tank Vent Tube Assembly)
    *b
    		Lower side
    (to Fuel Sender Gauge Assembly)
    *c
    		Connector A
    *d
    		Connector B


NG
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045K4009X.html)
OK


14.INSPECT FUEL TANK VENT TUBE ASSEMBLY
Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction

  1. Remove the fuel tank vent tube assembly (LandCruiser RM0000045K4009X.html).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    4 (S) - 1
    		Always
    		Below 1 Ω
    5 (E) - 2
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Fuel Tank Vent Tube Assembly
    *b
    		Component without harness connected
    (Fuel Tank Vent Tube Assembly)


NG
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045K4009X.html)
OK


15.INSPECT FUEL SENDER GAUGE ASSEMBLY

  1. Remove the fuel sender gauge assembly (LandCruiser RM0000045K4009X.html).

  1. Inspect the fuel sender gauge assembly (LandCruiser RM0000045K2006X.html).



NG
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045K4009X.html)
OK

REPLACE COMBINATION METER ASSEMBLY (LandCruiser RM000003QKY01CX.html)

16.CHECK HARNESS AND CONNECTOR (FUEL GAUGE CIRCUIT)

  1. Disconnect the G6 combination meter assembly connector.

  1. Disconnect the R40 fuel suction with pump and gauge tube assembly*1 or fuel tank vent tube assembly*2 connector.

    1. *1: for 2TR-FE
    2. *2: for 1KD-FTV, 1GD-FTV

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    G6-9 (L) - R40-3
    		Always
    		Below 1 Ω
    G6-24 (E) - R40-1
    		Always
    		Below 1 Ω
    G6-21 (E2) - Body ground
    		Always
    		Below 1 Ω
    G6-9 (L) or R40-3 - Body ground
    		Always
    		10 kΩ or higher
    G6-24 (E) or R40-1 - Body ground
    		Always
    		10 kΩ or higher
    Result
    Result
    		Proceed to
    OK (for 2TR-FE)
    		A
    OK (for 1KD-FTV, 1GD-FTV)
    		B
    NG
    		C


B
Go to step 19

C
REPAIR OR REPLACE HARNESS OR CONNECTOR
A


17.INSPECT FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction

  1. Remove the fuel suction with pump and gauge tube assembly (LandCruiser RM0000045MB00UX.html).

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A-3 - B-1
    		Always
    		Below 1 Ω
    A-1 - B-2
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Fuel Suction with Pump and Gauge Tube Assembly)
    *b
    		Lower side
    (to Fuel Sender Gauge Assembly)
    *c
    		Connector A
    *d
    		Connector B


NG
REPLACE FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY (LandCruiser RM0000045MB00UX.html)
OK


18.INSPECT FUEL SENDER GAUGE ASSEMBLY

  1. Remove the fuel sender gauge assembly (LandCruiser RM0000045MB00UX.html).

  1. Inspect the fuel sender gauge assembly (LandCruiser RM0000045M900PX.html).



NG
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045MB00UX.html)
OK

REPLACE COMBINATION METER ASSEMBLY (LandCruiser RM000003QKY01CX.html)

19.INSPECT FUEL TANK VENT TUBE ASSEMBLY


    Land Cruiser, Land Cruiser Prado. Grj150 Trj150,155 Kdj150,155 Lj150, Gdj150,155.Meter Gauge Display.Meter / Gauge System.Meter / Gauge System Fuel Receiver Gauge Malfunction

  1. Remove the fuel tank vent tube assembly.

    1. for 1KD-FTV: LandCruiser RM0000045GP00ZX.html
    2. for 1GD-FTV: LandCruiser RM0000045GP010X.html

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    A-3 - B-1
    		Always
    		Below 1 Ω
    A-1 - B-2
    		Always
    		Below 1 Ω
    Text in Illustration
    *a
    		Component without harness connected
    (Fuel Tank Vent Tube Assembly)
    *b
    		Lower side
    (to Fuel Sender Gauge Assembly)
    *c
    		Connector A
    *d
    		Connector B
    Result
    Result
    		Proceed to
    OK
    		A
    NG (for 1KD-FTV)
    		B
    NG (for 1GD-FTV)
    		C


B
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045GP00ZX.html)

C
REPLACE FUEL TANK VENT TUBE ASSEMBLY (LandCruiser RM0000045GP010X.html)
A


20.INSPECT FUEL SENDER GAUGE ASSEMBLY

  1. Remove the fuel sender gauge assembly.

    1. for 1KD-FTV: LandCruiser RM0000045GP00ZX.html
    2. for 1GD-FTV: LandCruiser RM0000045GP010X.html

  1. Inspect the fuel sender gauge assembly.

    1. for 1KD-FTV: LandCruiser RM0000045GN00NX.html
    2. for 1GD-FTV: LandCruiser RM0000045GN00OX.html
    Result
    Result
    		Proceed to
    OK
    		A
    NG (for 1KD-FTV)
    		B
    NG (for 1GD-FTV)
    		C


B
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045GP00ZX.html)

C
REPLACE FUEL SENDER GAUGE ASSEMBLY (LandCruiser RM0000045GP010X.html)
A

REPLACE COMBINATION METER ASSEMBLY (LandCruiser RM000003QKY01CX.html)