Dtc P0575 Cruise Control Input Circuit

Engine Hybrid System. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25
Cruise Control. Hilux. Tgn26, 36 Kun25, 26, 35, 36 Ggn25

DESCRIPTION

INSPECTION PROCEDURE

CHECK FOR DTC

DTC P0575 Cruise Control Input Circuit


DESCRIPTION

This DTC indicates the presence of internal abnormalities in the ECM.

DTC Code
DTC Detection Condition
Trouble Area
P0575
Either condition is met:
  1. The cruise control input signal is abnormal.
  2. The stop light switch input signal is abnormal.
ECM

INSPECTION PROCEDURE

NOTICE:
The ECM receives signals from each sensor to control all functions of the cruise control system. When a trouble code is stored, the fail-safe function remains on until the ignition switch is turned off.
1.CHECK FOR DTC

  1. Clear the DTCs (HILUX_TGN26 RM000000PM106WX.html).

  1. Perform the following to make sure the DTC detection conditions are met.

    HINT:
    If the detection conditions are not met, the system cannot detect the malfunction.

    1. Drive the vehicle at a speed of 40 km/h (25 mph) or more.

    2. Turn the cruise control main switch on.

    3. Push the cruise control main switch to -SET to activate cruise control.

  1. Check for DTCs (HILUX_TGN26 RM000000PM106WX.html).

    OK:
    DTC P0575 is not output.


NG
REPLACE ECM (HILUX_TGN26 RM0000013Z001IX.html)
OK

USE SIMULATION METHOD TO CHECK (HILUX_TGN26 RM000004QR7005X.html)