Parking Brake Lever -- Removal |
- CAUTION:
- Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (COROLLA_ZRE142 RM000000KT10H0X.html).
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Front Seat Side Airbag) |
- CAUTION:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
| 2. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat) |
- HINT:
- Refer to the instructions for Removal of the front seat assembly (Link).
| 3. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat) |
- HINT:
- Refer to the instructions for Removal of the front seat assembly (COROLLA_ZRE142 RM000000AR902OX.html).
| 4. REMOVE FRONT SEAT ASSEMBLY RH |
- HINT:
- Perform the same procedure for the LH side.
| 5. REMOVE CONSOLE BOX ASSEMBLY |
- HINT:
- Refer to the instructions for Removal of the front console box (COROLLA_ZRE142 RM000002XV501QX.html).
| 6. REMOVE NO. 2 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY |
Remove the 4 bolts and No. 2 belt anchor reinforcement sub-assembly.
 |
| 7. REMOVE NO. 3 BELT ANCHOR REINFORCEMENT SUB-ASSEMBLY |
Turn back the floor carpet, and remove the 5 bolts and No. 3 belt anchor reinforcement sub-assembly.
 |
| 8. SEPARATE PARKING BRAKE EQUALIZER |
Remove the lock nut and loosen the adjusting nut.
 |
Separate the parking brake equalizer from the No. 3 parking brake cable assembly as shown in the illustration.
 |
Separate the parking brake equalizer from the No. 2 parking brake cable assembly.
- HINT:
- Perform the same procedure for the No. 3 parking brake cable assembly.
| 9. REMOVE PARKING BRAKE LEVER ASSEMBLY |
Disconnect the parking brake switch connector.
 |
Remove the 2 bolts and parking brake lever assembly.
 |
| 10. REMOVE PARKING BRAKE EQUALIZER |
Disengage the 2 claws to separate the parking brake cable end stopper from the No. 1 parking brake cable assembly.
 |
Disengage the 2 claws to remove the parking brake equalizer from the parking brake cable end stopper.
 |
| 11. REMOVE PARKING BRAKE CABLE END STOPPER |
Remove the parking brake cable end stopper from the No. 1 parking brake cable assembly.
 |
| 12. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY |
Remove the adjusting nut.
 |
Pull up the parking brake lever claw.
 |
Remove the No. 1 parking brake cable assembly.
 |
| 13. REMOVE PARKING BRAKE SWITCH ASSEMBLY |
Remove the screw and parking brake switch assembly from the parking brake lever sub-assembly.
 |