Dtc C1Ae1 Front Left Sensor Malfunction
DESCRIPTION
INSPECTION PROCEDURE
CHECK DTC OUTPUT
REPLACE NO. 1 ULTRASONIC SENSOR (FRONT LEFT SENSOR)
CHECK DTC OUTPUT
DTC C1AE1 Front Left Sensor Malfunction |
DESCRIPTION
The No. 1 ultrasonic sensor (front left sensor) is installed on the front bumper. The ECU detects obstacles based on signals received from the No. 1 ultrasonic sensor (front left sensor). If the No. 1 ultrasonic sensor (front left sensor) has an open or other malfunction, it will not function normally.DTC No.
| DTC Detection Condition
| Trouble Area
|
C1AE1
| A malfunction of the No. 1 ultrasonic sensor (front left sensor).
| - No. 1 ultrasonic sensor (front left sensor)
- Clearance warning ECU
|
INSPECTION PROCEDURE
- NOTICE:
- If the DTC is output after repairs, turn the ignition switch to ON and turn the clearance sonar main switch on. Then clear the DTC (CAMRY_ACV40 RM000000VKU01FX.html).
Check for DTCs (CAMRY_ACV40 RM000000VKU01FX.html).
- Result:
Result
| Proceed to
|
Only DTC C1AE1 is output
| A
|
DTC C1AE1 and C1AEC are output
| B
|
No DTC is output
| C
|
2.REPLACE NO. 1 ULTRASONIC SENSOR (FRONT LEFT SENSOR) |
Replace the No. 1 ultrasonic sensor (front left sensor) with a normally functioning sensor (CAMRY_ACV40 RM000001PYF01OX.html).
- HINT:
- All of the sensors are interchangeable. To confirm whether a sensor is functioning normally, switch it with a known good sensor from the other end of the vehicle.
Clear the DTCs (CAMRY_ACV40 RM000000VKU01FX.html).
Check for DTCs (CAMRY_ACV40 RM000000VKU01FX.html).
- Result:
Result
| Proceed to
|
DTC C1AE1 is output
| A
|
No DTC is output
| B
|
| END (FRONT LEFT SENSOR WAS DEFECTIVE) |
|
|