Theft Deterrent System (W/ Entry And Start System) How To Proceed With Troubleshooting

Securities. Camry. Acv40 Gsv40
Theft Deterrent. Camry. Acv40 Gsv40

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS

  3. INSPECT BATTERY VOLTAGE

  4. INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM

  5. SYMPTOM SIMULATION

  6. PROBLEM SYMPTOMS TABLE

  7. PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM

  8. ADJUST, REPAIR OR REPLACE

  9. CONFIRMATION TEST

Theft Deterrent System (W/ Entry And Start System) -- How To Proceed With Troubleshooting


HINT:
  1. Use this procedure to troubleshoot the theft deterrent system.
  2. The intelligent tester should be used in step 4 and 7-(c).


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

    1. Interview the customer to confirm the trouble (CAMRY_ACV40 RM000000UZ104DX.html).


    NEXT


    3.INSPECT BATTERY VOLTAGE

    1. Measure the battery voltage.

      Standard Voltage:
      11 to 14 V
      1. If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.

    NEXT


    4.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM

    1. Use the intelligent tester to check that the CAN communication system functions normally.

      Result:
      Result
      		Proceed to
      CAN DTC is not output
      		A
      CAN DTC is output (for LHD)
      		B
      CAN DTC is output (for RHD)
      		C


    		B.
    GO TO CAN COMMUNICATION SYSTEM (for LHD) (CAMRY_ACV40 RM0000041AG000X.html)

    		C.
    GO TO CAN COMMUNICATION SYSTEM (for RHD) (CAMRY_ACV40 RM0000041AF000X.html)
    A


    5.SYMPTOM SIMULATION

      NEXT


      6.PROBLEM SYMPTOMS TABLE

      1. Refer to Problem Symptoms Table (Link).

        Result
        Result
        		Proceed to
        Fault is not listed in Problem Symptoms Table
        		A
        Fault is listed in Problem Symptoms Table
        		B



      		B.
      Go to step 8
      A


      7.PERFORM TROUBLESHOOTING ACCORDING TO MALFUNCTION SYMPTOM

      1. System Description (CAMRY_ACV40 RM0000026P0022X.html)

      2. Terminals of ECU (CAMRY_ACV40 RM000001PQV01SX.html)

      3. Data List / Active Test (CAMRY_ACV40 RM000001PQY01PX.html)


      NEXT


      8.ADJUST, REPAIR OR REPLACE

        NEXT


        9.CONFIRMATION TEST

          NEXT

          END