Using a plastic hammer, tap in new straight pins to the cylinder block.

Turn the roller by hand to check that it turns smoothly.

Remove the oil filler cap and gasket.

Lexus IS250 IS220d GSE20 ALE20 4GR-FSE ENGINE MECHANICAL

Using a 19 mm deep socket wrench, install the temperature sensor.

Remove the 11 clips and intake duct seal.

Lexus IS250 IS220d GSE20 ALE20 4GR-FSE ENGINE MECHANICAL

Using SST and a hammer, tap in the oil seal until its surface is flush with the rear oil seal retainer edge.

Using SST, hold the crankshaft.

Lexus IS250 IS220d GSE20 ALE20 4GR-FSE ENGINE MECHANICAL