Exhaust Pipe Installation

Using a vernier caliper, measure the free length of the compression spring.

Minimum length:

41.5 mm (1.634 in.)

Install a new gasket by hand so that its surface is flush with the exhaust manifold.

ПРИМЕЧАНИЕ:

1. Make sure the gasket is facing the correct direction.
   
2. Do not reuse the removed gasket.
   
3. Do not push in the gasket while installing the front exhaust pipe.
   

Install the front exhaust pipe with the 2 compression springs and 2 bolts.

Момент затяжки:

43 Н*м{438 кгс*см, 32 фунт-сила-футов}

Install a new gasket onto the front exhaust pipe.

Connect the 3 exhaust pipe supports, and install the center exhaust pipe.

Install the 2 bolts.

Момент затяжки:

43 Н*м{438 кгс*см, 32 фунт-сила-футов}

Using a vernier caliper, measure the free length of the compression spring.

Minimum length:

38.5 mm (1.516 in.)

Install a new gasket by hand so that its surface is flush with the center exhaust pipe.

ПРИМЕЧАНИЕ:

1. Make sure the gasket is facing the correct direction.
   
2. Do not reuse the removed gasket.
   
3. Do not push in the gasket while installing the tailpipe.
   

Connect the 2 exhaust pipe supports, and install the tailpipe.

Install the 2 compression springs and 2 bolts.

Момент затяжки:

43 Н*м{438 кгс*см, 32 фунт-сила-футов}

Using SST, install the sensor to the front exhaust pipe.

Специальный инструмент (SST):

09224-00010

Момент затяжки:

40 Н*м{408 кгс*см, 30 фунт-сила-футов}for use with SST

44 Н*м{449 кгс*см, 32 фунт-сила-футов}for use without SST

УКАЗАНИЕ:

1. Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).
   
2. Make sure SST and wrench are connected in a straight line.
   

Connect the sensor connector.