Circuit Opening Relay On-Vehicle Inspection

Двигатель. Toyota Rav4. Aca30, 33, 38 Ala30
Система Управления Двигателем 2Az-Fe. Toyota Rav4. Aca30, 33, 38 Ala30

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. INSPECT INSTRUMENT PANEL JUNCTION BLOCK

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Circuit Opening Relay -- On-Vehicle Inspection



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
ПРЕДОСТЕРЕЖЕНИЕ:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. INSPECT INSTRUMENT PANEL JUNCTION BLOCK
ПРИМЕЧАНИЕ:
The circuit opening relay is built into the instrument panel junction block.


  1. Measure the resistance between the terminals.


    Toyota Rav4. Aca30, 33, 38 Ala30.Система Управления Двигателем 2Az-Fe.Система Sfi.Circuit Opening Relay On-Vehicle Inspection

    Standard resistance:
    Tester Connection
    		Specified Condition
    1B-11 - 1A-8
    		10 kΩ or higher
    1B-11 - 1A-8
    		Below 1 Ω
    (when battery voltage is applied to terminals 1E-5 and 1D-1)
    If the result is not as specified, replace the instrument panel junction block.


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL