Fuel Tank Disassembly

Remove the purge line hose, air inlet line hose and EVAP line tube from the fuel pump.

Remove the joint clip and fuel tank main tube.

ПРЕДОСТЕРЕЖЕНИЕ:

1. Before removing the tube joint clip, check for foreign matter around the clip. Clean if necessary.
   

1. Keep the O-ring free of foreign matter, as it becomes contaminated easily.
   

1. Do not use any tools in this procedure.
   

1. Do not forcefully bend or twist the tube.
   

1. Put the tube in a plastic bag to prevent damage and contamination.
   

1. If the fuel suction plate and tube are stuck together, pinch the tube and turn it carefully to disconnect it.
   

1. Be careful not to damage the clip. If the clip is damaged, replace it.
   

Remove the 8 bolts and set plate.

Disconnect the fuel hose and remove the fuel pump from the fuel tank.

ПРИМЕЧАНИЕ:

Do not damage the fuel pump.

Remove the gasket from the fuel pump.

Remove the tube from the fuel tube clamps.

Remove the tube from the fuel tube clamps.

Remove the 4 tube clamps from the fuel tank.

Remove the 7 fuel tank cushions from the fuel tank.

Remove the 5 screws and sender gauge.