Shift And Select Lever Shaft -- Disassembly |
| 1. REMOVE SELECTING BELL CRANK ASSEMBLY |
Remove the 2 bolts and selecting bell crank from the transmission case.
 |
| 2. REMOVE CONTROL SHIFT LEVER BUSH |
Remove the control shift lever bush from the selecting bellcrank.
 |
| 3. REMOVE NO. 1 SELECTING BELLCRANK DUST COVER |
Remove the dust cover from the selecting bellcrank.
 |
| 4. REMOVE BACK-UP LIGHT SWITCH ASSEMBLY |
Using SST, remove the back-up light switch and gasket.
- Специальный инструмент (SST):
- 09816-30010
 |
| 5. REMOVE NO. 1 LOCK BALL ASSEMBLY |
Remove the lock ball from the transmission case.
 |
| 6. REMOVE NO. 2 LOCK BALL ASSEMBLY |
Remove the lock ball from the transmission case.
 |
| 7. REMOVE SHIFT GATE PIN |
Remove the shift gate pin from the transmission case.
 |
| 8. REMOVE CONTROL SHAFT COVER |
Remove the 4 bolts and control shaft cover from the transmission case.
 |
| 9. REMOVE NO. 1 SHIFT LEVER INNER |
Using a pin punch and hammer, tap out the slotted spring pin from the No.1 shift lever inner.
 |
Remove the No. 1 shift lever inner and shift inter lock plate from the shift and select lever shaft.
| 10. REMOVE SHIFT AND SELECT LEVER SHAFT |
Remove the shift control cover and the shift and select lever boot from the shift and select lever shaft.
 |
| 11. REMOVE SHIFT GATE PLATE |
Remove the 2 bolts and shift gate plate from the No. 1 shift lever inner.
 |
| 12. REMOVE PIN |
Remove the 2 pins.
 |
| 13. REMOVE SHIFT LEVER DAMPER |
Remove the 2 bolts and shift lever damper from the shift lever shaft.
 |
| 14. REMOVE CONTROL SHAFT COVER OIL SEAL |
Using a screwdriver, pry out the oil seal from the control shaft cover.
 |
| 15. REMOVE SHIFT FORK SHAFT BEARING |
Using SST and a press, press out the bearing.
- Специальный инструмент (SST):
- 09285-76010
 |