Exhaust Gas Temperature Sensor Installation

Temporarily install the sensor with the 2 nuts and union nut.

Tighten the 2 nuts.

Момент затяжки:

6.4 Н*м{65 кгс*см, 57 фунт-сила-дюймов}

Using SST, tighten the union nut.

Специальный инструмент (SST):

09023-38401

Момент затяжки:

27 Н*м{275 кгс*см, 20 фунт-сила-футов} for use with SST

30 Н*м{306 кгс*см, 22 фунт-сила-футов} for use without SST

УКАЗАНИЕ:

Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).

Temporarily install the sensor with the union nut.

Using SST, tighten the union nut.

Специальный инструмент (SST):

09023-38401

Момент затяжки:

27 Н*м{275 кгс*см, 20 фунт-сила-футов} for use with SST

30 Н*м{306 кгс*см, 22 фунт-сила-футов} for use without SST

УКАЗАНИЕ:

Use a torque wrench with a fulcrum length of 30 cm (11.81 in.).

Temporarily install a new gasket and the exhaust manifold converter with the 3 nuts.

Temporarily install the No. 2 exhaust manifold stay LH with the 2 bolts and nut.

Temporarily install the No. 2 manifold stay RH with the 3 bolts.

Temporarily install the No. 1 manifold stay with the bolt and nut.

Tighten the 2 bolts holding the No. 2 exhaust manifold stay to the cylinder block (upper bolt → lower bolt).

Момент затяжки:

56 Н*м{571 кгс*см, 41 фунт-сила-футов}

While pushing the manifold converter towards the cylinder block, tighten the 3 nuts holding the exhaust manifold converter to the turbocharger.

Момент затяжки:

25 Н*м{255 кгс*см, 18 фунт-сила-футов}

Tighten the nut holding the No. 2 exhaust manifold stay to the exhaust manifold converter.

Момент затяжки:

56 Н*м{571 кгс*см, 41 фунт-сила-футов}

Tighten the bolt holding the No. 2 manifold stay to the exhaust manifold converter.

Момент затяжки:

56 Н*м{571 кгс*см, 41 фунт-сила-футов}

УКАЗАНИЕ:

Ensure that the stay is pushed flush to the cylinder block and manifold converter while tightening.

Tighten the 2 bolts holding the No. 2 manifold stay to the cylinder block.

Момент затяжки:

56 Н*м{571 кгс*см, 41 фунт-сила-футов}

Tighten the bolt holding the No. 1 manifold stay to the cylinder head.

Момент затяжки:

25 Н*м{255 кгс*см, 18 фунт-сила-футов}

УКАЗАНИЕ:

Ensure that the stay is pushed flush to the cylinder head and manifold converter while tightening.

Tighten the nut holding the No. 1 manifold stay to the exhaust manifold converter.

Момент затяжки:

25 Н*м{255 кгс*см, 18 фунт-сила-футов}

Install the manifold converter insulator with the 3 nuts.

Момент затяжки:

28.5 Н*м{291 кгс*см, 21 фунт-сила-футов}

Install the manifold converter insulator with the 5 bolts.

Момент затяжки:

28.5 Н*м{291 кгс*см, 21 фунт-сила-футов}

Install the engine assembly to the vehicle (see page RAV4_ACA30 RM0000019Y7008X.html).