Crankshaft Position Sensor Removal

Двигатель. Toyota Rav4. Aca30, 33, 38 Ala30
Система Управления Двигателем 2Az-Fe. Toyota Rav4. Aca30, 33, 38 Ala30

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

  2. REMOVE GENERATOR ASSEMBLY

  3. REMOVE CRANKSHAFT POSITION SENSOR

Crankshaft Position Sensor -- Removal



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
ПРЕДОСТЕРЕЖЕНИЕ:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE GENERATOR ASSEMBLY

  1. Remove the generator assembly from the vehicle (see page RAV4_ACA30 RM0000017VJ001X.html).



3. REMOVE CRANKSHAFT POSITION SENSOR


Toyota Rav4. Aca30, 33, 38 Ala30.Система Управления Двигателем 2Az-Fe.Система Sfi.Crankshaft Position Sensor Removal

  1. Disconnect the sensor connector.

  1. Remove the connector clamp.

  1. Remove the wire harness from the wire harness clamp bracket.

  1. Remove the wire harness clamp.

  1. Remove the bolt and sensor.