Crankshaft Position Sensor Installation

Двигатель. Toyota Rav4. Aca30, 33, 38 Ala30
Система Управления Двигателем 2Az-Fe. Toyota Rav4. Aca30, 33, 38 Ala30

  1. INSTALL CRANKSHAFT POSITION SENSOR

  2. INSTALL GENERATOR ASSEMBLY

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  4. CHECK FOR ENGINE OIL LEAKAGE

Crankshaft Position Sensor -- Installation



1. INSTALL CRANKSHAFT POSITION SENSOR


Toyota Rav4. Aca30, 33, 38 Ala30.Система Управления Двигателем 2Az-Fe.Система Sfi.Crankshaft Position Sensor Installation
ПРИМЕЧАНИЕ:
Make sure that the O-ring is not cracked or jammed when installing it.

  1. Apply a light coat of engine oil to the O-ring of the sensor.



    Toyota Rav4. Aca30, 33, 38 Ala30.Система Управления Двигателем 2Az-Fe.Система Sfi.Crankshaft Position Sensor Installation

  1. Install the sensor with the bolt.

    Момент затяжки:
    9.0 Н*м{90 кгс*см, 80 фунт-сила-дюймов}

  1. Install the wire harness clamp.

  1. Install the connector clamp.

  1. Connect the sensor connector.

  1. Confirm that the wire harness of the sensor is secured to the wire harness clamp bracket through the back of the rib of the timing chain cover.



2. INSTALL GENERATOR ASSEMBLY

  1. Install the generator to the vehicle (see page RAV4_ACA30 RM0000017VG001X.html).



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


4. CHECK FOR ENGINE OIL LEAKAGE