Ecm Installation

Install the 2 brackets to the ECM with the 4 screws.

Момент затяжки:

3.0 Н*м{30 кгс*см, 27 фунт-сила-дюймов}

Connect the 2 ECM connectors.

ПРИМЕЧАНИЕ:

When connecting the connector, make sure that dirt, water and other foreign matter does not become stuck between the connector and the other part.

1. Connect the 2 ECM connectors and lower the 2 levers.
   

   ПРИМЕЧАНИЕ:

   Make sure that the 2 levers are securely lowered.

Install the ECM with the 3 bolts.

Момент затяжки:

6.5 Н*м{66 кгс*см, 57 фунт-сила-дюймов}

Install the air cleaner case with the 3 bolts.

Момент затяжки:

5.0 Н*м{51 кгс*см, 44 фунт-сила-дюймов}

Connect the harness clamp.

Install the air cleaner filter element onto the air cleaner case.

Insert the hinge part of the air cleaner cap into the air cleaner case, then hang the 2 hook clamps.

Align the matchmarks of the No. 1 air cleaner hose and throttle body, and then connect the air cleaner hose No. 1 to the throttle body and unfasten the No. 1 air cleaner hose clamp.

ПРИМЕЧАНИЕ:

Make sure that the hose clamp is at the correct angle.

Connect the purge line hose to the clamp.

Connect the No. 2 ventilation hose to the air cleaner hose.

Install the 4 wire harness clamps.

Connect the mass air flow meter connector.

When replacing the ECM, perform vehicle stability control system recognition in ECM (see page RAV4_ACA30 RM00000226C000X.html).

When replacing the ECM, perform the RESET MEMORY procedure (A/T initialization) (see page RAV4_ACA30 RM000000W7F01AX.html).