Fuel Pressure Regulator Installation

Apply a light coat of gasoline to 2 new O-rings, and install them onto the fuel pressure regulator.

Install the fuel pressure regulator to the fuel filter.

Connect the pump harness connector.

Apply gasoline to a new O-ring and install the O-ring to the fuel filter.

Attach the 5 claws to the claw holes and install the fuel pump.

Attach the 2 claws to the claw holes and install the bracket.

Attach the 2 claws to the claw holes and install the sub-tank.

Connect the wire harness.

Install the 2 springs to the fuel suction plate shafts and install them to the sub-tank.

Using needle-nose pliers, install a new E-ring.

УКАЗАНИЕ:

Slightly lower the sub-tank to install the E-ring.

Install a new gasket onto the fuel pump.

Connect the fuel hose and install the fuel pump into the fuel tank.

ПРИМЕЧАНИЕ:

Do not damage the fuel pump filter.

Install the set plate with the 8 bolts.

Момент затяжки:

4.0 Н*м{41 кгс*см, 35 фунт-сила-дюймов}

Install the fuel tube with the joint clip.

ПРЕДОСТЕРЕЖЕНИЕ:

1. Check that there are no scratches or foreign objects on the connecting parts.
   

1. Check that the fuel tube joint is inserted securely.
   

1. Check that the fuel tube joint clip is on the collars of the fuel tube joint.
   

1. After installing the tube joint clip, check that the fuel tube joint has not been pulled off.
   

1. Be careful not to damage the clip. If the clip is damaged, replace it.
   

Install the purge line hose, air inlet line hose and EVAP line tube to the fuel pump.

Install the fuel tank (see page RAV4_ACA30 RM000000YLR00GX.html).