Ecd System Precaution

Двигатель. Toyota Rav4. Aca30, 33, 38 Ala30
  1. INJECTOR COMPENSATION CODE

  1. DIFFICULT TO START ENGINE, ENGINE STALLING, OR BLACK SMOKE EMITTED

  1. FOR USING INTELLIGENT TESTER

Ecd System -- Precaution



УКАЗАНИЕ:
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

Expression
Ignition Switch (position)
Engine Switch (condition)
Ignition Switch off
LOCK
Off
Ignition Switch on (IG)
ON
On (IG)
Ignition Switch on (ACC)
ACC
On (ACC)
Engine Start
START
Start

1.INJECTOR COMPENSATION CODE
УКАЗАНИЕ:
  1. Each injector has different fuel injection characteristics. In order to optimize fuel injection performance, the ECM compensates for these differences by adjusting the fuel injection duration of each injector according to its compensation code. Injector compensation codes are unique, 30-digit, alphanumeric values printed on the head portion of each injector.
  2. If an incorrect injector compensation code is input into the ECM, the engine may rattle or engine idling may become rough. In addition, engine failure may occur and the life of the engine may be shortened


    Toyota Rav4. Aca30, 33, 38 Ala30.Система Управления Двигателем 2Ad-Ftv.Система Ecd.Ecd System  Precaution
  1. When an injector is replaced, the injector's compensation code must be input into the ECM (see page RAV4_ACA30 RM000000TJ400AX.html).

  2. When the ECM is changed, all of the existing injector compensation codes must be input into the new ECM (see page RAV4_ACA30 RM000000TJ400AX.html).


2.DIFFICULT TO START ENGINE, ENGINE STALLING, OR BLACK SMOKE EMITTED
  1. Check if the customer's problem is described below. If so, refer to the troubleshooting section on the page given.

    1. Engine is difficult to start or stalls (see page RAV4_ACA30 RM000000TJ500FX.html).

    2. Black smoke is emitted (see page RAV4_ACA30 RM000000TIR00HX.html).


3.FOR USING INTELLIGENT TESTER
ПРЕДОСТЕРЕЖЕНИЕ:
  1. Observe the following items for safety reasons:
    1. Read its instruction manual before using the tester.
    2. Prevent the tester cable from being caught on the pedals, shift lever and steering wheel when driving with the tester connected to the vehicle.
    3. When driving the vehicle while using the tester for testing purposes, two persons are required. One drive the vehicle, and the other operates the tester.