Датчик Уровня Топлива В Сборе Проверка
INSPECT FUEL SENDER GAUGE ASSEMBLY
INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank)
Датчик Уровня Топлива В Сборе -- Проверка |
1. INSPECT FUEL SENDER GAUGE ASSEMBLY |
Check that the float moves smoothly between F and E.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
2 - 3
| Float position is F (upper)
| 12 to 18 Ω
|
Float position is E (lower)
| 405 to 415 Ω
|
If the result is not as specified, replace the fuel sender gauge assembly.
2. INSPECT FUEL SENDER GAUGE ASSEMBLY (for Fuel Sub Tank) |
Check that the float moves smoothly between F and E.
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
| Condition
| Specified Condition
|
1 - 2
| Float position is F (upper)
| 12 to 18 Ω
|
Float position is E (lower)
| 405 to 415 Ω
|
If the result is not as specified, replace the fuel sender gauge assembly.