Генератор Разборка

Цепи Электропитания Сеть Land Cruiser Prado.
Аккумуляторная Батарея Система Зарядки Двигателя 5L-E.

  1. INSPECT GENERATOR WITH VACUUM PUMP ASSEMBLY

  2. REMOVE VACUUM PUMP ASSEMBLY

  3. REMOVE GENERATOR REAR END COVER

  4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY

  5. REMOVE GENERATOR REGULATOR ASSEMBLY

  6. REMOVE GENERATOR HOLDER WITH RECTIFIER

  7. REMOVE GENERATOR RECTIFIER END FRAME

  8. REMOVE GENERATOR ROTOR ASSEMBLY

Генератор -- Разборка



1. INSPECT GENERATOR WITH VACUUM PUMP ASSEMBLY

  1. Mount the generator in a vise between aluminum plates.




  1. Insert a screwdriver to hold the generator rotor.

  1. Install a bolt and nut to the outside of the pulley so that the bolt head and nut clamp the pulley, and then position a dial indicator as shown in the illustration.

  1. Turn the pulley and measure the backlash between the generator rotor and vacuum pump shaft.

    Maximum backlash:
    1.6 mm (0.0630 in.)
    If the backlash is more than the maximum, replace the generator rotor and vacuum pump shaft.


2. REMOVE VACUUM PUMP ASSEMBLY


    .Аккумуляторная Батарея Система Зарядки Двигателя 5L-E.Система Зарядки Аккумуляторной Батареи.Генератор Разборка

  1. Place matchmarks as shown in the illustration.

    Text in Illustration
    *a
    		Matchmark

  1. Remove the 4 bolts and vacuum pump.



3. REMOVE GENERATOR REAR END COVER



  1. Remove the nut and terminal insulator.

  1. Remove the bolt, 3 nuts, rectifier plate and rear end cover.



4. REMOVE GENERATOR BRUSH HOLDER ASSEMBLY

  1. Remove the brush holder cover.




  1. Remove the 2 screws and brush holder.

  1. Remove the plate seal.



5. REMOVE GENERATOR REGULATOR ASSEMBLY



  1. Remove the 3 screws and generator regulator.



6. REMOVE GENERATOR HOLDER WITH RECTIFIER



  1. Remove the 4 screws and generator holder with rectifier.

  1. Remove the 4 rubber insulators.



7. REMOVE GENERATOR RECTIFIER END FRAME


    .Аккумуляторная Батарея Система Зарядки Двигателя 5L-E.Система Зарядки Аккумуляторной Батареи.Генератор Разборка

  1. Remove the 4 nuts and cord clip.

    Text in Illustration
    *1
    		Cord Clip


    .Аккумуляторная Батарея Система Зарядки Двигателя 5L-E.Система Зарядки Аккумуляторной Батареи.Генератор Разборка

  1. Using SST, remove the rectifier end frame.

    SST
    09286-46011
    Text in Illustration
    *a
    		Hold

    		Turn

  1. Remove the washer from the rotor.



8. REMOVE GENERATOR ROTOR ASSEMBLY


    .Аккумуляторная Батарея Система Зарядки Двигателя 5L-E.Система Зарядки Аккумуляторной Батареи.Генератор Разборка

  1. Using SST and a press, press out the rotor.

    SST
    09950-60010(09951-00180)
    09950-70010(09951-07100)