Корпус Дроссельной Заслонки Дизельного Двигателя Проверка

Inspect the throttle control motor.

1. Measure the resistance according to the value(s) in the table below.
   

   Standard Resistance:

   Tester Connection	Condition	Specified Condition
   1 - 2	20°C (68°F)	18 to 22 Ω
   2 - 3	20°C (68°F)	18 to 22 Ω
   4 - 5	20°C (68°F)	18 to 22 Ω
   5 - 6	20°C (68°F)	18 to 22 Ω

   Text in Illustration

   *a	Component without harness connected (Diesel Throttle Body)

   If the result is not as specified, replace the diesel throttle body.
   

Inspect the throttle open switch.

1. Measure the resistance according to the value(s) in the table below.
   

   Standard Resistance:

   Tester Connection	Condition	Specified Condition
   1 - 2	Fully open	Below 1 Ω
   1 - 2	Fully close	10 kΩ or higher

   Text in Illustration

   *a	Component without harness connected (Diesel Throttle Body)

   If the result is not as specified, replace the diesel throttle body.