Приводной Ремень -- Снятие |
| 1. REMOVE FRONT BUMPER COVER LOWER |
Remove the clip, 5 bolts and front bumper cover lower.
| 2. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 4 bolts.
Unhook the engine under cover from the vehicle body as shown in the illustration.
 |
| 3. REMOVE FRONT FENDER APRON SEAL RH |
Remove the 4 clips and fender apron seal.
| 4. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY |
Disconnect the sensor connector.
 |
Detach the wire harness clamp.
Loosen the hose clamp and remove the resonator with air cleaner cap.
Detach the 4 hook clamps, and then remove the air cleaner cap and resonator with air cleaner cap.
 |
| 5. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY |
| 6. REMOVE AIR CLEANER CASE ASSEMBLY |
Remove the 3 bolts and air cleaner case.
 |
| 7. REMOVE VANE PUMP V BELT |
Loosen bolt and nut, and remove the V belt.
 |
| 8. REMOVE COOLER COMPRESSOR V BELT |
Loosen nut and adjusting bolt, and remove the V belt.
Text in Illustration *1 Adjusting Bolt
 |
| 9. REMOVE FAN AND GENERATOR V BELT |
Loosen 2 bolts.
 |
Loosen adjusting bolt, and remove the V belt.
Text in Illustration *1 Adjusting Bolt