Трос Механизма Переключения Передач (Для Моделей С Кузовом Типа Хэтчбэк) Регулировка. Corolla ZZE150

Install the transmission control cable assembly to the manual transaxle.

Release the lock of the cable length adjustment structure of the select cable.

1. Slide the slider.
   

2. Push the lock piece downward to release the lock.
   

Lock the shift system fixing pin for reverse inhibitor.

1. Move the shaft in the arrow (*1) direction until it is locked (shaft stroke 15 mm (0.59 in.)).
   

2. Press the pin in the arrow (*3) direction until it is locked while pushing the button in the arrow (*2) direction.
   

3. While pressing the pin, move the shaft in the arrow (*4) direction until it is locked (shaft stroke 7.3 mm (0.29 in.)).
   

Push the slider shaft until it contacts the cam wall.

ПРИМЕЧАНИЕ:

1. Do not pull up the slider shaft.
   
2. When adjusting the cable, make sure that the shift lever is not in the first or second gear position.
   

Lock the cable length adjustment structure of the select cable.

ПРИМЕЧАНИЕ:

1. Push the lock piece as far as it will go.
   
2. Confirm whether the cable length adjustment structure is locked securely.
   

Release the shift system fixing pin for reverse inhibitor.

1. Move the pin in the arrow (*1) direction until it is locked (pin stroke 8.5 mm (0.33 in.)).
   

2. Check that the pin is released by moving the shaft in the arrow (*2) direction.