Трос Механизма Переключения Передач (Для Моделей С Кузовом Типа Седан) Регулировка. Corolla ZZE150

Install the transmission control cable assembly to the manual transaxle.

Using 2 screwdrivers, pull the lock piece outward from the adjuster case.

Lock the shift system fixing pin for reverse inhibitor.

1. Move the shaft in the arrow (*1) direction until it is locked (shaft stroke 15 mm (0.59 in.)).
   

2. Press the pin in the arrow (*3) direction until it is locked while pushing the button in the arrow (*2) direction.
   

3. While pressing the pin, move the shaft in the arrow (*4) direction until it is locked (shaft stroke 7.3 mm (0.29 in.)).
   

Push the slider shaft until it contacts the cam wall.

ПРИМЕЧАНИЕ:

1. Do not pull up the slider shaft.
   
2. When adjusting the cable, make sure that the shift lever is not in the first or second gear position.
   

Install the control shift cable to the shift lever assembly.

Install the control select cable to the shift lever assembly.

ПРИМЕЧАНИЕ:

1. Make sure that the lock piece is protruded from the adjuster case.
   
2. When adjusting the cable, make sure that the shift lever is not in the first or second gear position.
   

Install the clip to the shift lever.

Press in the lock piece to the adjuster case.

ПРИМЕЧАНИЕ:

Securely press in the lock piece until the lock engages.

Release the shift system fixing pin for reverse inhibitor.

1. Move the pin in the arrow (*1) direction until it is locked (pin stroke 8.5 mm (0.33 in.)).
   

2. Check that the pin is released by moving the shaft in the arrow (*2) direction.