Впускной Коллектор Снятие. Corolla Auris

Loosen the radiator drain cock plug.

УКАЗАНИЕ:

Collect the coolant in a container and dispose of it according to the regulations in your area.

Remove the radiator reservoir cap.

ПРЕДОСТЕРЕЖЕНИЕ:

Do not remove the radiator reservoir cap while the engine and radiator are still hot.

Pressurized, hot engine coolant and steam may be released and cause serious burns.

Loosen the cylinder block drain cock plug.

УКАЗАНИЕ:

The plug is on the backside of the generator on the exhaust manifold side.

Hold the rear of the cover and raise it to disengage the 2 clips on the front of the cover. Continue to raise the cover to disengage the 2 clips on the front of the cover and remove the cover.

ПРИМЕЧАНИЕ:

Attempting to disengage both front and rear clips at the same time may cause the cover to break.

Disconnect the mass air flow meter connector.

Disconnect the 2 clamps.

Disconnect the band and ventilation hose, and remove the air cleaner cap sub-assembly.

Disconnect the connector and 2 water hoses.

Remove the 2 bolts, 2 nuts and throttle body.

Remove the gasket.

Remove the bolt and wire harness bracket.

Disconnect the 3 hoses.

Remove the 4 bolts, 2 nuts, intake manifold stay and intake manifold.

Remove the gasket from the intake manifold.

Using a "TORX" socket E6, remove the 2 stud bolts from the intake manifold.