Ecm Установка. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Управления Двигателем 2Zr-Fe. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. INSTALL ECM

  2. INSTALL AIR CLEANER CASE

  3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY

  4. INSTALL NO. 2 CYLINDER HEAD COVER

  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

  6. REGISTER IMMOBILISER COMMUNICATION ID

  7. PERFORM INITIALIZATION (for U341E)

Ecm -- Установка



1. INSTALL ECM


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. Install the bracket to the ECM with the 4 screws.

    Момент затяжки:
    3.0 Н*м{30 кгс*см, 27 фунт-сила-дюймов}


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. Install the ECM with the 2 bolts.

    Момент затяжки:
    8.0 Н*м{82 кгс*см, 71 фунт-сила-дюймов}


  1. Connect the 2 ECM connectors.



      COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

    1. Connect the 2 ECM connectors and lower the 2 levers.

      ПРИМЕЧАНИЕ:
      1. When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.
      2. Make sure that the 2 levers are securely lowered.


2. INSTALL AIR CLEANER CASE


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. Install the air cleaner case with the 3 bolts.

    Момент затяжки:
    7.0 Н*м{71 кгс*см, 62 фунт-сила-дюймов}

  1. Install the wire harness clamp to the air cleaner case.

  1. Install the air cleaner filter element.



3. INSTALL AIR CLEANER CAP SUB-ASSEMBLY


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Система Управления Двигателем 2Zr-Fe.Система Sfi.Ecm Установка

  1. Connect the air cleaner cap sub-assembly with the band.

  1. Connect the ventilation hose.



    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Система Управления Двигателем 2Zr-Fe.Система Sfi.Ecm Установка

  1. Connect the 2 clamps.

  1. Connect the mass air flow meter connector.



4. INSTALL NO. 2 CYLINDER HEAD COVER


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. Engage the 4 clips to install the V-bank cover.

    ПРИМЕЧАНИЕ:
    1. Be sure to engage the clips securely.
    2. Do not apply excessive force or do not hit the cover to engage the clips. This may cause the cover to break.


5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL


6. REGISTER IMMOBILISER COMMUNICATION ID
ПРИМЕЧАНИЕ:
If the ECM is replaced, register the ECM communication ID for Immobiliser System (Refer to the Service Bulletin for Registration).


7. PERFORM INITIALIZATION (for U341E)
УКАЗАНИЕ:
If the ECM is replaced, certain procedures are necessary (See page Нажмите здесь).