Интегрированное Реле Установка. Corolla Auris

Engage the 2 claws and install the integration relay to the relay block.

Connect the 3 connectors.

Install the 3 wire harnesses with the 3 bolts to the fusible link assembly.

Момент затяжки:

3.4 Н*м{35 кгс*см, 30 фунт-сила-дюймов}

Connect the 2 connectors to the fusible link assembly.

Install the 2 wire harnesses with the 2 bolts to the fusible link assembly.

Момент затяжки:

5.4 Н*м{55 кгс*см, 48 фунт-сила-дюймов}

Engage the claw and install the fuse holder to the fusible link block assembly.

Install the bolt.

Момент затяжки:

5.4 Н*м{55 кгс*см, 48 фунт-сила-дюймов}

Engage the 4 claws and install the fuse holder and fusible link block assembly.

Engage the 10 claws and assemble the upper side and lower side of the relay block cover.

ПРИМЕЧАНИЕ:

Securely assemble in order to prevent the wire harness from catching.

Engage the guide and claw of the relay block.

Install the 3 bolts.

Момент затяжки:

8.4 Н*м{86 кгс*см, 74 фунт-сила-дюймов}

Install the 2 wire harness clamps.

Install the front fender liner LH with the 5 clips.

Install the bracket to the ECM with the 4 screws.

Момент затяжки:

3.0 Н*м{30 кгс*см, 27 фунт-сила-дюймов}

Install the ECM with the 2 bolts.

Момент затяжки:

8.0 Н*м{82 кгс*см, 71 фунт-сила-дюймов}

Connect the 2 ECM connectors.

1. Connect the 2 ECM connectors and lower the 2 levers.
   

   ПРИМЕЧАНИЕ:

   1. When connecting the connectors, make sure that dirt, water or other foreign matter does not get caught between the connectors and other parts.
      
   2. Make sure that the 2 levers are securely lowered.
      

Install the 3 bolts and air cleaner case.

Момент затяжки:

7.0 Н*м{71 кгс*см, 62 фунт-сила-дюймов}

Install the air cleaner filter element.

Install the air cleaner cap sub-assembly, and connect the 2 clamps and band.

Connect the No. 2 ventilation hose.

Connect the mass air flow meter connector.

Attach the 4 clips to install the engine cover.

ПРИМЕЧАНИЕ:

1. Line up the 4 grommets using the oil filler cap and oil dipstick as guides.
   
2. Push down on the four locations shown to install the cover.
   

Engage the 2 clamps of the wire harness.

Install the 2 nuts.

Момент затяжки:

8.4 Н*м{86 кгс*см, 74 фунт-сила-дюймов}

Connect the 3 connectors.