Клапан Рог Установка. Corolla Auris
Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
INSTALL EGR VALVE ASSEMBLY
INSTALL NO. 2 EGR PIPE SUB-ASSEMBLY
INSTALL NO. 1 ENGINE COVER
1. INSTALL EGR VALVE ASSEMBLY |
Install a new gasket and the EGR valve with the 2 bolts.
- Момент затяжки:
- 24 Н*м{245 кгс*см, 18 фунт-сила-футов}
Connect the EGR valve connector.
2. INSTALL NO. 2 EGR PIPE SUB-ASSEMBLY |
Temporarily install 2 new gaskets and the No. 2 EGR pipe with the nut and bolt as shown in the illustration.
- УКАЗАНИЕ:
- Note the direction of the gaskets.
- Install the pipe with the claws facing the pipe as shown in the illustration.
Temporarily install the bolt and nut as shown in the illustration.
Tighten the 2 bolts holding the EGR pipe to the cylinder head.
- Момент затяжки:
- 24 Н*м{245 кгс*см, 18 фунт-сила-футов}
Tighten the 2 nuts holding the EGR pipe to the EGR valve.
- Момент затяжки:
- 24 Н*м{245 кгс*см, 18 фунт-сила-футов}
3. INSTALL NO. 1 ENGINE COVER |
Attach the 4 clips to install the engine cover.
- ПРИМЕЧАНИЕ:
- Line up the 4 grommets using the oil filler cap and oil dipstick as guides.
- Push down on the four locations shown to install the cover.