Реле Вентилятора Системы Охлаждения Проверка Без Снятия С Автомобиля. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Охлаждения 2Ad-Fhv. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. INSPECT NO. 1 FAN RELAY (Marking: FAN NO. 1)

  2. INSPECT NO. 2 FAN RELAY (Marking: FAN NO. 2)

  3. INSPECT NO. 3 FAN RELAY (Marking: FAN NO. 3)


Реле Вентилятора Системы Охлаждения -- Проверка Без Снятия С Автомобиля



1. INSPECT NO. 1 FAN RELAY (Marking: FAN NO. 1)
  1. Remove the relay from the engine room No. 1 relay block.



    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Система Охлаждения 2Ad-Fhv.Система Охлаждения.Реле Вентилятора Системы Охлаждения  Проверка Без Снятия С Автомобиля
  1. Measure the resistance of the relay.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    -
    10 kΩ or higher
    3 - 5
    -
    Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)
    If the result is not as specified, replace the relay.
  1. Install the relay.



2. INSPECT NO. 2 FAN RELAY (Marking: FAN NO. 2)
  1. Remove the relay from the engine room No. 1 relay block.



    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Система Охлаждения 2Ad-Fhv.Система Охлаждения.Реле Вентилятора Системы Охлаждения  Проверка Без Снятия С Автомобиля
  1. Measure the resistance of the relay.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 4
    -
    Below 1 Ω
    3 - 4
    -
    10 kΩ or higher
    (when battery voltage is applied to terminals 1 and 2)
    3 - 5
    -
    10 kΩ or higher
    3 - 5
    -
    Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)
    If the result is not as specified, replace the relay.
  1. Install the relay.



3. INSPECT NO. 3 FAN RELAY (Marking: FAN NO. 3)
  1. Remove the relay from the engine room No. 1 relay block.



    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Система Охлаждения 2Ad-Fhv.Система Охлаждения.Реле Вентилятора Системы Охлаждения  Проверка Без Снятия С Автомобиля
  1. Measure the resistance of the relay.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    3 - 5
    -
    10 kΩ or higher
    3 - 5
    -
    Below 1 Ω
    (when battery voltage is applied to terminals 1 and 2)
    If the result is not as specified, replace the relay.
  1. Install the relay.