Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Управления Двигателем 2Ad-Fhv. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Корпус Дроссельной Заслонки Дизельного Двигателя -- Снятие |
1. REMOVE NO. 1 ENGINE COVER |
Detach the 4 clips and remove the engine cover.
- ПРИМЕЧАНИЕ:
- Lift the area around the clips on the top of the engine cover.
- Do not suddenly lift the engine cover. Remove the cover slowly by detaching the clips on by one.
- Lift area A shown in the illustration particularly slowly because there is a cowl on the top of the area around A. Failure to do so may damage the cover.
![]() |
2. REMOVE UPPER RADIATOR AIR DEFLECTOR |
Remove the 6 clips and upper radiator air deflector.
![]() |
3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- ПРЕДОСТЕРЕЖЕНИЕ:
- Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
4. REMOVE NO. 1 ENGINE UNDER COVER |
5. DISCONNECT VACUUM TRANSMITTING HOSE ASSEMBLY |
Disengage the vacuum transmitting hose from the 3 clamps.
![]() |
Disconnect the vacuum transmitting hose from the No. 2 air tube.
![]() |
6. REMOVE NO. 3 AIR HOSE |
Remove the No. 3 air hose.
Open the retainer and remove the No. 3 air hose from the No. 2 air tube and intercooler.
7. REMOVE NO. 4 AIR HOSE |
Disconnect the sensor connector.
![]() |
Remove the bolt from the No. 2 air tube.
Loosen the 2 hose clamps.
Disconnect the No. 2 air tube from the No. 4 air hose.
Remove the No. 4 air hose from the diesel throttle body.
8. REMOVE DIESEL THROTTLE BODY ASSEMBLY |
Disconnect the throttle position sensor connector.
![]() |
Disconnect the throttle motor connector.
Remove the 2 nuts and 2 bolts, and then remove the diesel throttle body and gasket.