Передний Сальник Коленчатого Вала Установка. Corolla Auris

Apply MP grease to a new oil seal lip.

Using SST and a hammer, tap in the new oil seal until its surface is flush with the oil pump edge.

SST

09223-22010

ПРИМЕЧАНИЕ:

1. Keep the lip free from foreign matter.
   
2. Do not tap the oil seal at an angle.
   

Align the key with the key groove of the crankshaft damper, and slide the crankshaft damper to the crankshaft.

Using SST, secure the crankshaft damper.

SST

09960-10010(09962-01000,09963-01000)

Tighten the bolt to the specified torque.

Момент затяжки:

180 Н*м{1835 кгс*см, 133 фунт-сила-футов}

Temporarily install the v-ribbed belt onto each pulley.

ПРИМЕЧАНИЕ:

1. Before installing the V belt, check each pulley for any kind of liquid and chips.
   

1. Check that the ribs of the V belt are correctly fitted into the grooves of the pulleys.
   

Fit the 4 retainers and install the No. 1 engine cover.

Установите правое усиление элемента передней подвески и закрепите его 4 болтами.

Момент затяжки:

96 Н*м{979 кгс*см, 71 фунт-сила-футов}

ПРИМЕЧАНИЕ:

Предварительно затяните болты A и B, а затем полностью затяните 4 болта в следующем порядке: C, B, D и A.

Install the engine under cover rear RH with the 5 clips.