Сальник Дифференциала -- Замена |
| 1. DRAIN MANUAL TRANSAXLE OIL |
Remove the filler plug and the gasket.
Remove the drain plug and gasket, and then drain the manual transaxle oil.
| 2. REMOVE FRONT DRIVE SHAFT ASSEMBLY |
| 3. REMOVE TRANSMISSION CASE OIL SEAL |
Using SST, remove the transmission case oil seal.
- SST
- 09308-00010
 |
| 4. REMOVE TRANSAXLE CASE OIL SEAL |
Using SST, remove the transaxle case oil seal.
- SST
- 09308-00010
 |
| 5. INSTALL TRANSMISSION CASE OIL SEAL |
Coat the lip of a new oil seal with MP grease.
 |
Using SST and a hammer, tap in the oil seal.
- SST
- 09950-70010(09951-07200)
09710-26011(09710-05061)
- Standard depth:
- 9.6 to 10.2 mm (0.378 to 0.402 in.)
- ПРИМЕЧАНИЕ:
- Do not damage the oil seal lip.
| 6. INSTALL TRANSAXLE CASE OIL SEAL |
Coat the lip of a new oil seal with MP grease.
 |
Using SST and a hammer, tap in the oil seal.
- SST
- 09636-20010
- Standard depth:
- 1.6 to 2.2 mm (0.063 to 0.087 in.)
- ПРИМЕЧАНИЕ:
- Do not damage the oil seal lip.
| 7. INSTALL FRONT DRIVE SHAFT ASSEMBLY |
| 8. ADD MANUAL TRANSAXLE OIL |
Install a new gasket and the drain plug.
- Момент затяжки:
- 39 Н*м{400 кгс*см, 29 фунт-сила-футов}
Add manual transaxle oil.
 |
Install the transmission filler plug and a new gasket.
- Момент затяжки:
- 39 Н*м{400 кгс*см, 29 фунт-сила-футов}
| 9. INSPECT MANUAL TRANSAXLE OIL |
|
Stop the vehicle in a level place.
Remove the transmission filler plug and the gasket.
Check that the oil surface is within 5 mm (0.20 in.) of the bottom of the transmission filler plug opening.
- ПРИМЕЧАНИЕ:
- Excessively large or small amounts of oil may cause problems.
- After replacing the oil, drive the vehicle and check the oil level again.
Check for oil leakage when the oil level is low.
Install the transmission filler plug and a new gasket.
- Момент затяжки:
- 39 Н*м{400 кгс*см, 29 фунт-сила-футов}