Датчик Температуры Охлаждающей Жидкости Снятие. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Управления Двигателем 1Nd-Tv. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. DRAIN ENGINE COOLANT

  2. REMOVE NO. 1 ENGINE COVER

  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY

  4. REMOVE AIR CLEANER CASE

  5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR

Датчик Температуры Охлаждающей Жидкости -- Снятие



1. DRAIN ENGINE COOLANT

  1. Loosen the radiator drain cock plug.

    УКАЗАНИЕ:
    Collect the coolant in a container and dispose of it according to the regulations in your area.

  1. Remove the radiator reservoir cap.

    ПРЕДОСТЕРЕЖЕНИЕ:
    Do not remove the radiator reservoir cap while the engine and radiator are still hot.
    Pressurized, hot engine coolant and steam may be released and cause serious burns.


  1. Loosen the cylinder block drain cock plug.

    УКАЗАНИЕ:
    The plug is on the backside of the generator on the exhaust manifold side.


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Система Управления Двигателем 1Nd-Tv.Система Ecd.Датчик Температуры Охлаждающей Жидкости Снятие



2. REMOVE NO. 1 ENGINE COVER


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. Disengage the 4 pins and remove No. 1 engine cover sub-assembly.



3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. Disconnect the mass air flow meter connector.

  1. Disconnect the No. 2 ventilation hose.

  1. Disconnect the 2 clamps and band, and remove the air cleaner cap sub-assembly.



4. REMOVE AIR CLEANER CASE


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. Disconnect the mass air flow meter connector.

  1. Disconnect the No. 2 ventilation hose.

  1. Disconnect the 2 clamps and band, and remove the air cleaner cap sub-assembly.



5. REMOVE ENGINE COOLANT TEMPERATURE SENSOR


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Система Управления Двигателем 1Nd-Tv.Система Ecd.Датчик Температуры Охлаждающей Жидкости Снятие

  1. Disconnect the engine coolant temperature sensor connector.

  1. Using SST, remove the engine coolant temperature sensor and gasket.

    SST
    09817-33190