Блок Механической Трансмиссии В Блоке С Главной Передачей Проверка. Corolla ZZE150

Трансмиссия. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Механическая Трансмиссия Ea60. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. INSPECT REVERSE IDLER GEAR THRUST CLEARANCE

  2. INSPECT REVERSE IDLER GEAR RADIAL CLEARANCE

Блок Механической Трансмиссии В Блоке С Главной Передачей -- Проверка



1. INSPECT REVERSE IDLER GEAR THRUST CLEARANCE


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. Using a feeler gauge, measure the reverse idler gear thrust clearance.

    Standard clearance:
    0.40 to 1.05 mm (0.0157 to 0.0413 in.)
    Maximum clearance:
    1.05 mm (0.0413 in.)
    ПРИМЕЧАНИЕ:
    When assembled, the top end of the reverse idler gear shaft is normally supported by the manual transmission case. Make sure that movement of the shaft does not affect clearance measurement.
    If the clearance exceeds the maximum after replacing the reverse idler thrust washer, replace the reverse idler gear, needle roller bearing and/or reverse idler gear shaft.


2. INSPECT REVERSE IDLER GEAR RADIAL CLEARANCE


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. Using a dial indicator, measure the reverse idler gear radial clearance.

    Standard clearance:
    0.015 to 0.048 mm (0.0006 to 0.0019 in.)
    Maximum clearance:
    0.048 mm (0.0019 in.)
    If the clearance exceeds the maximum, replace the reverse idler gear, needle roller bearing, and reverse idler gear shaft.