Дифференциальный Датчик Давления (Для Dpf) Проверка Без Снятия С Автомобиля. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. INSPECT DIFFERENTIAL PRESSURE SENSOR ASSEMBLY


Дифференциальный Датчик Давления (Для Dpf) -- Проверка Без Снятия С Автомобиля



1. INSPECT DIFFERENTIAL PRESSURE SENSOR ASSEMBLY
УКАЗАНИЕ:
The type of ignition switch on this model differs according to the specifications of the vehicle. For the expressions used in this section, refer to the "EXPRESSIONS OF IGNITION SWITCH" precaution (See page Нажмите здесь).
  1. Connect the intelligent tester to the DLC3.

  1. Turn the ignition switch on (IG).

  1. Turn the Intelligent tester main switch ON.

  1. Select the menu items: Powertrain / Engine / Data List / DPNR Differential Pressure.

  1. Using pliers, grip the claws of the clip and slide the clip to disconnect the No. 1 vacuum transmitting hose from the sensor.



    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
  1. Using SST, apply pressure to the sensor.

    SST
    09992-00242
  1. Check the pressure value of the sensor.

    Standard pressure:
    Approximately the same pressure as the applied pressure is indicated.
    ПРИМЕЧАНИЕ:
    NOTICE: Perform the inspection within the range of 0 kPa to 98 kPa (0 kg/cm2 to 1 kg/cm2).
    If the result is not as specified, check the sensor circuit (See page Нажмите здесь).
  1. Using pliers, grip the claws of the clip and slide the clip to connect the No. 1 vacuum transmitting hose.