Свеча Накаливания Проверка Без Снятия С Автомобиля. Corolla Auris

Remove the glow plug connector (See page Нажмите здесь).

Using an ohmmeter, measure the resistance between the glow plug terminal and ground.

1. for CCo (Insulator color: Black)
   

   Standard resistance:

   Tester Connection	Condition	Specified Condition (Approximately)
   Glow plug terminal - Ground	-20°C (-4°F)	0.92 Ω
   Glow plug terminal - Ground	0°C (32°F)	0.94 Ω
   Glow plug terminal - Ground	20°C (68°F)	0.96 Ω
   Glow plug terminal - Ground	40°C (104°F)	0.98 Ω
   Glow plug terminal - Ground	60°C (140°F)	1.00 Ω

   ПРИМЕЧАНИЕ:

   1. Do not damage the glow plug pipes as this could cause an open circuit or shorten the life of the glow plugs.
      
   2. Prevent oil and fuel from spraying onto the glow plugs when cleaning.
      
   3. Wipe any oil off the terminal and the Bakelite washer with a dry cloth if they are stained with oil during the inspection.
      
   If the result is not as specified, replace the glow plug.
   

2. for DPF (Insulator color: Red)
   

   Standard resistance:

   Tester Connection	Condition	Specified Condition (Approximately)
   Glow plug terminal - Ground	-20°C (-4°F)	0.84 Ω
   Glow plug terminal - Ground	0°C (32°F)	0.89 Ω
   Glow plug terminal - Ground	20°C (68°F)	0.95 Ω
   Glow plug terminal - Ground	40°C (104°F)	1.01 Ω
   Glow plug terminal - Ground	60°C (140°F)	1.06 Ω

   ПРИМЕЧАНИЕ:

   1. Do not damage the glow plug pipes as this could cause an open circuit or shorten the life of the glow plugs.
      
   2. Prevent oil and fuel from spraying onto the glow plugs when cleaning.
      
   3. Wipe any oil off the terminal and the Bakelite washer with a dry cloth if they are stained with oil during the inspection.
      
   If the result is not as specified, replace the glow plug.
   

Install the glow plug connector (See page Нажмите здесь).