Форсунка Добавления Отработавшего Топлива Снятие. Corolla Auris
Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
REMOVE NO. 1 ENGINE COVER
REMOVE AIR CLEANER CAP SUB-ASSEMBLY
REMOVE AIR CLEANER CASE
REMOVE FUEL HOSE PROTECTOR
REMOVE FUEL TUBE SUB-ASSEMBLY
REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY
Форсунка Добавления Отработавшего Топлива -- Снятие |
1. REMOVE NO. 1 ENGINE COVER |
Detach the 4 clips and remove the engine cover.
- ПРИМЕЧАНИЕ:
- Lift the area around the clips on the top of the engine cover.
- Do not suddenly lift the engine cover. Remove the cover slowly by detaching the clips on by one.
- Lift area A shown in the illustration particularly slowly because there is a cowl on the top of the area around A. Failure to do so may damage the cover.
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY |
Disconnect the mass air flow meter connector.
Disconnect the No. 2 ventilation hose.
Disconnect the 2 clamps and band, and remove the air cleaner cap sub-assembly.
Remove the air cleaner filter element.
3. REMOVE AIR CLEANER CASE |
Remove the 3 bolts and air cleaner case.
4. REMOVE FUEL HOSE PROTECTOR |
Remove the bolt and fuel hose protector.
5. REMOVE FUEL TUBE SUB-ASSEMBLY |
Disconnect the exhaust fuel addition injector connector.
Turn the retainer as shown in the illustration.
Disconnect the fuel tube sub-assembly.
- ПРИМЕЧАНИЕ:
- Be careful not to bend the fuel tube.
Remove the union bolt, fuel tube sub-assembly and gasket.
6. REMOVE EXHAUST FUEL ADDITION INJECTOR ASSEMBLY |
Remove the bolt, washer, nozzle holder clamp, exhaust fuel addition injector assembly and gasket.