Стартер Снятие. Corolla Auris
Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE NO. 1 ENGINE COVER
REMOVE RADIATOR UPPER AIR DEFLECTOR
REMOVE NO. 1 ENGINE UNDER COVER
REMOVE BATTERY CLAMP SUB-ASSEMBLY
REMOVE BATTERY
REMOVE BATTERY TRAY
DISCONNECT VACUUM TRANSMITTING HOSE ASSEMBLY
REMOVE NO. 2 AIR TUBE
REMOVE STARTER ASSEMBLY
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
2. REMOVE NO. 1 ENGINE COVER |
Detach the 4 clips and remove the engine cover.
- ПРИМЕЧАНИЕ:
- Lift the area around the clips on the top of the engine cover.
- Do not suddenly lift the engine cover. Remove the cover slowly by detaching the clips on by one.
- Lift area A shown in the illustration particularly slowly because there is a cowl on the top of the area around A. Failure to do so may damage the cover.
3. REMOVE RADIATOR UPPER AIR DEFLECTOR |
Remove the 6 clips and upper radiator air deflector.
4. REMOVE NO. 1 ENGINE UNDER COVER |
5. REMOVE BATTERY CLAMP SUB-ASSEMBLY |
Remove the bolt and loosen the nut.
Detach the hook of the battery clamp from the battery carrier, and then remove the battery clamp.
8. DISCONNECT VACUUM TRANSMITTING HOSE ASSEMBLY |
Disengage the vacuum transmitting hose from the 3 clamps.
Disconnect the vacuum transmitting hose from the No. 2 air tube.
Separate the No. 2 and No. 3 air hoses.
- УКАЗАНИЕ:
- Pull out the air hoses after the retainer is opened.
10. REMOVE STARTER ASSEMBLY |
Remove the bolt and disconnect the wire harness clamp.
Remove the 2 bolts and disconnect the ground cables from the manual transaxle.
Disconnect the starter connector.
Remove the nut and disconnect the wire harness.
Remove the 2 bolts and starter assembly.