Стартер (Изготовление Tmuk, Tmmt) Установка. Corolla Auris

Install the starter assembly with the 2 bolts.

Момент затяжки:

64 Н*м{653 кгс*см, 47 фунт-сила-футов}

Install the terminal nut and cover the nut with the cap.

Момент затяжки:

9.8 Н*м{100 кгс*см, 87 фунт-сила-дюймов}

Connect the starter connector.

Install the bracket with the bolt.

Момент затяжки:

26 Н*м{260 кгс*см, 19 фунт-сила-футов}

Install the ground cables to the manual transaxle with the 2 bolts.

Момент затяжки:

8.4 Н*м{85 кгс*см, 74 фунт-сила-дюймов}

Connect the air hoses No.2 and No.3.

ПРИМЕЧАНИЕ:

1. Check that retainer is closed, when the connector is inserted.
   
2. If replacing the hose, check for deposits in the intercooler and air hoses No.2 and No.3. If necessary, wipe up deposits.
   
3. If replacing the hose, apply fresh oil to the O-ring.
   
4. The connector should be inserted until a sound indicates that the installation is complete. Check that the connector cannot be disconnected by pulling after inserted.
   
5. Do not use a quick connector that has been dropped.
   

Connect the 2 vacuum transmitting hoses to the No. 2 air tube.

Install the vacuum transmitting hose to the 3 clamps.

Install the battery clamp.

Момент затяжки:

for bolt:

17 Н*м{168 кгс*см, 12 фунт-сила-футов}

for nut:

3.5 Н*м{36 кгс*см, 31 фунт-сила-дюймов}

Install the 6 clips and upper radiator air deflector.

Attach the 4 clips to install the engine cover.