Механическая Трансмиссия В Блоке С Главной Передачей В Сборе Снятие. Corolla ZZE150
REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 2AD-FHV)
REMOVE REAR ENGINE MOUNTING INSULATOR (for 2AD-FHV)
REMOVE FRONT DRIVE SHAFT ASSEMBLY LH
REMOVE FRONT DRIVE SHAFT ASSEMBLY RH
REMOVE ENGINE WIRE (for 2AD-FHV)
REMOVE NO. 1 AIR TUBE
REMOVE STARTER ASSEMBLY (for 2AD-FHV)
REMOVE AIR TUBE SUPPORT
REMOVE OIL PAN INSULATOR
REMOVE STIFFENER PLATE LH
REMOVE STIFFENER PLATE RH
REMOVE MANUAL TRANSAXLE ASSEMBLY
REMOVE WIRE HARNESS CLAMP BRACKET
REMOVE ENGINE MOUNTING BRACKET LH
REMOVE FRONT ENGINE MOUNTING BRACKET
REMOVE REAR ENGINE MOUNTING BRACKET
Механическая Трансмиссия В Блоке С Главной Передачей В Сборе -- Снятие |
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE (for 2AD-FHV) |
- УКАЗАНИЕ:
- See the steps from "REMOVE NO. 1 ENGINE UNDER COVER" through "REMOVE ENGINE ASSEMBLY WITH TRANSAXLE" (See page Нажмите здесь).
2. REMOVE REAR ENGINE MOUNTING INSULATOR (for 2AD-FHV) |
Remove the bolt, and detach the engine mounting insulator RR from the engine mounting bracket RR.
3. REMOVE FRONT DRIVE SHAFT ASSEMBLY LH |
С помощью SST снимите передний приводной вал.
- SST
- 09520-00031
09520-01010
- ПРИМЕЧАНИЕ:
- Будьте осторожны, чтобы не повредить сальник картера трансмиссии в блоке с главной передачей, чехол внутреннего шарнира и пылезащитный чехол приводного вала.
- Старайтесь не уронить приводной вал.
4. REMOVE FRONT DRIVE SHAFT ASSEMBLY RH |
Выверните 2 болта и вытяните приводной вал вместе с корпусом подшипника вала.
Снимите приводной вал с трансмиссии в блоке с главной передачей.
- ПРИМЕЧАНИЕ:
- Будьте осторожны, чтобы не повредить чехол внутреннего шарнира и пыльник приводного вала.
- Старайтесь не уронить приводной вал.
5. REMOVE ENGINE WIRE (for 2AD-FHV) |
Remove the engine wire from the engine.
Disconnect the 3 clamps, and disconnect the wire harness.
Loosen the hose clamp, and remove the 2 bolts and the No. 1 air tube.
7. REMOVE STARTER ASSEMBLY (for 2AD-FHV) |
Remove the bolt and disconnect the wire harness clamp.
Remove the 2 bolts and disconnect the ground cables from the manual transaxle.
Disconnect the starter connector.
Remove the nut and disconnect the wire harness.
Remove the 2 bolts and starter assembly.
8. REMOVE AIR TUBE SUPPORT |
Remove the 2 bolts and the bracket.
9. REMOVE OIL PAN INSULATOR |
Remove the 2 bolts and the oil pan insulator from the stiffener plate.
10. REMOVE STIFFENER PLATE LH |
Remove the 4 bolts and the stiffener plate from the engine and transaxle assembly.
11. REMOVE STIFFENER PLATE RH |
Remove the 4 bolts and the stiffener plate from the engine and transaxle assembly.
12. REMOVE MANUAL TRANSAXLE ASSEMBLY |
Remove the 5 bolts and the manual transaxle assembly from the engine.
13. REMOVE WIRE HARNESS CLAMP BRACKET |
Remove the bolt and the wire harness clamp bracket.
14. REMOVE ENGINE MOUNTING BRACKET LH |
Remove the 4 bolts and the engine mounting bracket LH from the transaxle.
15. REMOVE FRONT ENGINE MOUNTING BRACKET |
Remove the 3 bolts and the front engine mounting bracket.
16. REMOVE REAR ENGINE MOUNTING BRACKET |
Remove the 5 bolts and the rear engine mounting bracket.