Рычаг Переключения Передач (Для Моделей С Кузовом Типа Хэтчбэк) Проверка Без Снятия С Автомобиля. Corolla ZZE150

Трансмиссия. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Механическая Трансмиссия 'Multimode' C53A. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. INSPECT SHIFT LOCK SOLENOID

  2. INSPECT TRANSMISSION SHIFT MAIN SWITCH

  3. INSPECT SHIFT LEVER POSITION SENSOR

Рычаг Переключения Передач (Для Моделей С Кузовом Типа "Хэтчбэк") -- Проверка Без Снятия С Автомобиля



1. INSPECT SHIFT LOCK SOLENOID


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Механическая Трансмиссия 'Multimode' C53A.Система Механической Трансмиссии

  1. Disconnect the shift lock control unit assembly connector.

  1. Using an ohmmeter, measure the resistance between terminals 2 and 6.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    2 - 6
    		20°C (68°F)
    		30 to 35 Ω
    If the resistance is not as specified, replace the shift lock control unit assembly.


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Механическая Трансмиссия 'Multimode' C53A.Система Механической Трансмиссии

  1. Check the solenoid operating sound when applying battery voltage across terminals 2 and 6.
    If the solenoid does not operate, replace the shift lock control unit assembly.

  1. Connect the shift lock control unit assembly connector.



2. INSPECT TRANSMISSION SHIFT MAIN SWITCH


COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Механическая Трансмиссия 'Multimode' C53A.Система Механической Трансмиссии

  1. Disconnect the shift lock control unit assembly connector.

  1. Move the shift lever to the M position.

  1. Using an ohmmeter, measure the resistance according to the value in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    Shift Position
    		Specified Condition
    4 - 8
    		M
    		Below 1 Ω


    COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Механическая Трансмиссия 'Multimode' C53A.Система Механической Трансмиссии

  1. Move the shift lever to the E position.

  1. Using an ohmmeter, measure the resistance according to the value in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    Shift Position
    		Specified Condition
    4 - 8
    		E
    		10 kΩ or higher
    If the result is not as specified, replace the shift lever assembly.

  1. Connect the shift lock control unit assembly connector.



3. INSPECT SHIFT LEVER POSITION SENSOR


COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Механическая Трансмиссия 'Multimode' C53A.Система Механической Трансмиссии

  1. Disconnect the shift lever position sensor connector.

  1. Using an ohmmeter, measure the resistance according to the values in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    Shift Position
    		Specified Condition
    4 - 9 - 10 - 13
    		R
    		Below 1 Ω
    4 - 2 - 10 - 6
    		N
    		Below 1 Ω
    4 - 2 - 3 - 13
    		E, M
    		Below 1 Ω
    11 - 12
    		+
    		Below 1 Ω
    11 - 5 - 12
    		M
    		10 kΩ or higher
    11 - 5
    		-
    		Below 1 Ω
    If the result is not as specified, replace the shift lever assembly.

  1. Connect the shift lever position sensor connector.