Система Механической Трансмиссии 'Multimode' -- Проверка / Сброс Кодов Dtc |
- УКАЗАНИЕ:
- DTCs which are stored in the TCM can be displayed on the intelligent tester or generic OBD scan tool.
| CHECK DTC (Using intelligent tester) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Select the following menu items: Powertrain / Multi-Mode M/T.
Check DTCs and freeze frame data, and write them down.
See DTC chart to confirm the details of the DTCs (See page Нажмите здесь).
- УКАЗАНИЕ:
- Intelligent testers can display current DTC data, pending DTC data and historical DTC data. Touch the [Current], [Pending] or [History] button in the DTC display screen.
- [Current]: Displays the current DTC data
- [Pending]: Displays the pending DTC data
- [History]: Displays the historical DTC data (past codes)
| ДАННЫЕ ФИКСИРОВАННОГО НАБОРА ПАРАМЕТРОВ |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Read DTCs by selecting the following menu items: Powertrain / Multi-Mode M/T / DTC.
Select the parameter(s) to check the freeze frame data.
Note down the DTC(s) and freeze frame data.
- УКАЗАНИЕ:
- A "!" displayed in red to the left of DTC data indicates that freeze frame data has been recorded for that data.
- For help using the intelligent tester, refer to the instruction manual.
| CLEAR DTCs AND FREEZE FRAME DATA (Using intelligent tester) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester ON.
Select the following menu items: Powertrain / Multi-Mode M/T / DTC / Clear.
Erase DTCs and freeze frame data by pressing the YES button on the tester.
- УКАЗАНИЕ:
- For help using the intelligent tester, refer to the instruction manual.