Система Посадки И Запуска Режимы Data List / Active Test. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Запуска 2Ad-Fhv. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. READ DATA LIST

  1. PERFORM ACTIVE TEST

Система Посадки И Запуска -- Режимы Data List / Active Test



READ DATA LIST
УКАЗАНИЕ:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the DATA LIST information early in troubleshooting is one way to save diagnostic time.

  1. Connect the intelligent tester to the DLC3.
    When using the intelligent tester with the engine switch off, turn on and off any of the door courtesy light switches repeatedly at 1.5 or less second intervals until communication between the tester and vehicle starts.

  2. Turn the engine switch on (IG).

  3. Read the DATA LIST.

    Body:
    Tester Display
    		Measurement Item/Range
    		Normal Condition
    		Diagnostic Note
    ACC SW
    		Engine switch on (ACC) / ON or OFF
    		ON: Engine switch on (ACC)
    OFF: Engine switch off
    		-
    IG SW
    		Engine switch on (IG) / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    St SW1
    		Start switch 1 / ON or OFF
    		ON: Engine switch is pushed
    OFF: Engine switch is not pushed
    		-
    St SW2
    		Start switch 2 / ON or OFF
    		ON: Engine switch is pushed
    OFF: Engine switch is not pushed
    		-
    Str Unlock SW
    		Steering lock condition / ON or OFF
    		ON: Steering is unlocked (Engine switch on (ACC))
    OFF: Steering is locked (Engine switch off)
    		-
    N SW / C SW
    		Clutch pedal switch / ON or OFF
    		ON: Clutch pedal depressed
    OFF: Clutch pedal released
    		-
    Vehicle Spd Sig
    		Vehicle speed signal / STOP or RUN
    		STOP: Vehicle is stopped
    RUN: Vehicle is running
    		-
    E/G Cond
    		Engine condition / STOP or RUN
    		STOP: Engine is stopped
    RUN: Engine is running
    		-
    IG1 Relay Mon1
    		IG1 relay monitor (outer) / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    IG2 Relay Mon1
    		IG2 relay monitor (outer) / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    IG1 Relay Mon2
    		IG1 relay monitor (inner) / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    IG2 Relay Mon2
    		IG2 relay monitor (inner) / ON or OFF
    		ON: Engine switch on (IG)
    OFF: Engine switch off
    		-
    ACC Relay Mon
    		ACC relay monitor / ON or OFF
    		ON: Engine switch on (ACC)
    OFF: Engine switch off
    		-
    Latch Circuit
    		Ratch circuit / ON or OFF
    		ON: Engine switch on (IG) or engine running
    OFF: Engine switch off or on (ACC)
    		-
    Start Req Sig
    		Starter request signal monitor / ON or OFF
    		ON: Starter relay is ON
    OFF: Starter relay is OFF
    		Engine switch pressed and clutch pedal depressed
    Pwr Cond
    		Power supply condition / ALL, ACC ON, IG1 IG2, ST ON
    		ALL: All relays are OFF
    ACC ON: ACC relay is ON
    IG1: IG1 relay is ON
    IG2: IG2 relay is ON
    ST ON: ST request signal is ON
    		-
    ACC Cut Sig
    		ACC relay cut signal / ON or OFF
    		ON: Engine is cranking
    OFF: Engine is not cranking
    		-
    St Relay Mon
    		STARTER relay monitor / ON or OFF
    		ON: Engine is cranking
    OFF: Engine is not cranking
    		Engine is cranking with engine switch on (IG) and clutch pedal depressed
    Comm Entry&Start
    		Communication for certification ECU / OK or STOP
    		OK: Communication
    STOP: No communication
    		-


PERFORM ACTIVE TEST
УКАЗАНИЕ:
Using the intelligent tester to perform ACTIVE TEST allows the relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing the ACTIVE TEST early in troubleshooting is one way to save diagnostic time. The DATA LIST can be displayed while performing ACTIVE TESTs.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Perform the ACTIVE TEST according to the display on the tester.


Body:
Tester Display
Test Part
Control Range
Diagnostic Note
Lighting Ind
Indicator for lighting
ON / OFF
-
Ind Condition
Engine switch indicator
Green / Amber / No Sig
-
S Lock Pwr
Power supply for steering lock ECU
ON / OFF
-