Система Автоматической Трансмиссии Инициализация Электронной Системы. Corolla ZZE150

Трансмиссия. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Автоматическая Трансмиссия U341E. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. RESET MEMORY

Система Автоматической Трансмиссии -- Инициализация Электронной Системы



RESET MEMORY
ПРИМЕЧАНИЕ:
  1. Perform the RESET MEMORY (AT initialization) when replacing the automatic transaxle assembly, engine assembly or ECM.
  2. The RESET MEMORY can be performed only with the intelligent tester.
УКАЗАНИЕ:
The ECM memorizes the condition that the ECT controls the automatic transaxle assembly and engine assembly according to those characteristics. Therefore, when the automatic transaxle assembly, engine assembly, or ECM has been replaced, it is necessary to reset the memory so that the ECM can memorize the new information.
Reset procedure is as follows.

  1. Turn the ignition switch off.

  2. Connect the intelligent tester to the DLC3.

  3. Turn the ignition switch on (IG) and push the intelligent tester main switch on.

  4. Perform the Reset Memory procedure from the main menu.

  5. Enter the following menus: Powertrain / Engine and ECT / Utility / Reset Memory. Then, press "Next".

    ПРЕДОСТЕРЕЖЕНИЕ:
    After performing the RESET MEMORY, be sure to perform the ROAD TEST (See page Нажмите здесь) described earlier.
    УКАЗАНИЕ:
    The ECM is learned by performing the ROAD TEST.