Система Ecd Порядок Проведения Активной Диагностики. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Управления Двигателем 1Nd-Tv. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. ПОРЯДОК ПРОВЕДЕНИЯ АКТИВНОЙ ДИАГНОСТИКИ

Система Ecd -- Порядок Проведения Активной Диагностики


УКАЗАНИЕ:
Intelligent tester only:
Compared to normal mode, check mode is more sensitive to malfunctions. Therefore, check mode can detect the malfunctions that cannot be detected by normal mode.
ПРИМЕЧАНИЕ:
All the stored DTCs and freeze frame data are erased if: 1) the ECM is changed from normal mode to check mode or vice versa; or 2) the ignition switch is turned from ON to ACC or OFF during check mode.

ПОРЯДОК ПРОВЕДЕНИЯ АКТИВНОЙ ДИАГНОСТИКИ

  1. Turn the ignition switch off.

  2. Make sure that the vehicle is in the following conditions:

    1. Battery voltage is 11 V or more.

    2. Accelerator pedal is released.

    3. Parking brake lever is released.

    4. Shift lever is in neutral position.

    5. A/C switch is off.

  3. Connect the intelligent tester to the DLC3.

  4. Turn the ignition switch to the ON position.

  5. Turn the intelligent tester on.



    6. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150.Система Управления Двигателем 1Nd-Tv.Система Ecd.Система Ecd Порядок Проведения Активной Диагностики

  6. Enter the following menu items: Powertrain / Engine and ECT / Check Mode.

  7. Make sure that the MIL flashes as shown in the illustration.

  8. Start the engine (the MIL should turn OFF).

  9. Simulate the conditions of the malfunction described by the customer.

  10. Check the DTC(s) and freeze frame data using the intelligent tester.

  11. After checking the DTCs, inspect the appropriate circuits (See page Нажмите здесь).