Система Ecd Проверка / Сброс Кодов Dtc. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Управления Двигателем 1Nd-Tv. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. CHECK DTC

  1. CLEAR DTC

Система Ecd -- Проверка / Сброс Кодов Dtc


ПРИМЕЧАНИЕ:
Intelligent tester only:
When the diagnosis system is changed from normal mode to check mode, or vice versa, all the DTCs and freeze frame data recorded in normal mode will be erased. Before changing modes, always check and make a note of any recorded DTCs and freeze frame data.
УКАЗАНИЕ:
  1. DTCs which are stored in the ECM can be displayed on an intelligent tester. An intelligent tester can display current and pending DTCs.
  2. Same DTCs are not set if the ECM does not detect the same malfunction again during a second consecutive driving cycle. However, such malfunctions, detected on only one occasion, are stored as pending DTCs.
  3. The pending DTCs are set when the malfunction is detected once.

CHECK DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to the ON position.

  3. Turn the intelligent tester on.

  4. Enter the following menu items : Powertrain / Engine and ECT / DTC.

  5. Check and make a note of DTCs and freeze frame data.

  6. Confirm the details of the DTCs (See page Нажмите здесь).


CLEAR DTC

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to the ON position (do not start the engine) and turn the intelligent tester on.

  3. Enter the following menu items: Powertrain / Engine and ECT / DTC / Clear.

  4. Erase the DTCs and freeze frame data by pressing YES on the tester.