Система Ecd Процедура Поиска Неисправностей. Corolla Auris

Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
Система Управления Двигателем 1Ad-Ftv. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150

  1. VEHICLE BROUGHT TO WORKSHOP

  2. CUSTOMER PROBLEM ANALYSIS

  3. CONNECT INTELLIGENT TESTER TO DLC3*

  4. CHECK DTC AND FREEZE FRAME DATA*

  5. CLEAR DTC AND FREEZE FRAME DATA*

  6. CONDUCT VISUAL INSPECTION

  7. SET CHECK MODE DIAGNOSIS*

  8. CONFIRM PROBLEM SYMPTOMS

  9. CHECK FOR DTC*

  10. REFER TO DTC CHART

  11. CONDUCT BASIC INSPECTION

  12. REFER TO PROBLEM SYMPTOMS TABLE

  13. CHECK ECM POWER SOURCE CIRCUIT

  14. CONDUCT CIRCUIT INSPECTION

  15. ПРОВЕРЬТЕ, НЕТ ЛИ ЭПИЗОДИЧЕСКИХ НЕИСПРАВНОСТЕЙ

  16. CONDUCT PARTS INSPECTION

  17. IDENTIFY PROBLEM

  18. ADJUST AND/OR REPAIR OR REPLACE

  19. CONDUCT CONFIRMATION TEST

Система Ecd -- Процедура Поиска Неисправностей


УКАЗАНИЕ:
  1. Use the following procedures to troubleshoot the ECD system.
  2. *: Use the intelligent tester.


1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.CUSTOMER PROBLEM ANALYSIS

      NEXT


      3.CONNECT INTELLIGENT TESTER TO DLC3*
        УКАЗАНИЕ:
        If the display indicates a communication error with the tester, inspect the DLC3.
        When any CAN communication system DTCs are output, perform troubleshooting on the CAN communication system first.

      NEXT


      4.CHECK DTC AND FREEZE FRAME DATA*
        УКАЗАНИЕ:
        Record or print DTCs and freeze frame data if necessary.
        1. Check DTC (See page Нажмите здесь).
        1. Check freeze frame data (See page Нажмите здесь).

      NEXT


      5.CLEAR DTC AND FREEZE FRAME DATA*
        УКАЗАНИЕ:
        Refer to the relevant pages (See page Нажмите здесь).

      NEXT


      6.CONDUCT VISUAL INSPECTION

        NEXT


        7.SET CHECK MODE DIAGNOSIS*

          NEXT


          8.CONFIRM PROBLEM SYMPTOMS
            УКАЗАНИЕ:
            If the engine does not start, perform the "REFER TO DTC CHART" and "REFER TO PROBLEM SYMPTOMS TABLE" steps first.

            Result:

            Result
            		Proceed to
            Malfunction occurs
            		A
            Malfunction does not occur
            		B


          		B.
          SIMULATE SYMPTOMS
          A


          9.CHECK FOR DTC*
            УКАЗАНИЕ:
            Refer to the relevant pages (See page Нажмите здесь).

            Result:

            Result
            		Proceed to
            Trouble code
            		A
            No trouble code
            		B


          		B.
          Go to step 11
          A


          10.REFER TO DTC CHART

            NEXT

            Go to step 14


            11.CONDUCT BASIC INSPECTION

              Result:

              Result
              		Proceed to
              Malfunctioning parts not confirmed
              		A
              Malfunctioning parts confirmed
              		B


            		B.
            Go to step 16
            A


            12.REFER TO PROBLEM SYMPTOMS TABLE
              УКАЗАНИЕ:
              1. Engine difficult to start or stalling (See page Нажмите здесь).
              2. Black smoke emitted (See page Нажмите здесь).
              3. Rough idling or excessive engine vibration (See page Нажмите здесь).
              4. Engine knocking or rattling (See page Нажмите здесь).
              5. Lack of power or hesitation (See page Нажмите здесь).

              Result:

              Result
              		Proceed to
              Malfunctioning circuit confirmed
              		A
              Malfunctioning parts confirmed
              		B


            		B.
            Go to step 16
            A


            13.CHECK ECM POWER SOURCE CIRCUIT
              УКАЗАНИЕ:
              Refer to the relevant pages (See page Нажмите здесь).

            NEXT


            14.CONDUCT CIRCUIT INSPECTION

              Result:

              Result
              		Proceed to
              Malfunction not confirmed
              		A
              Malfunction confirmed
              		B


            		B.
            Go to step 17
            A


            15.ПРОВЕРЬТЕ, НЕТ ЛИ ЭПИЗОДИЧЕСКИХ НЕИСПРАВНОСТЕЙ

              NEXT

              Go to step 17


              16.CONDUCT PARTS INSPECTION

                NEXT


                17.IDENTIFY PROBLEM

                  NEXT


                  18.ADJUST AND/OR REPAIR OR REPLACE

                    NEXT


                    19.CONDUCT CONFIRMATION TEST

                      NEXT

                      END