Приводной Ремень Снятие. Corolla Auris
Двигатель. COROLLA, AURIS. ZZE150 ZRE151,152 NDE150
REMOVE NO. 1 ENGINE COVER
REMOVE UPPER RADIATOR AIR DEFLECTOR
REMOVE NO. 1 ENGINE UNDER COVER
REMOVE ENGINE UNDER COVER REAR RH
REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH
REMOVE V-RIBBED BELT
Приводной Ремень -- Снятие |
| 1. REMOVE NO. 1 ENGINE COVER |
Detach the 4 clips and remove the engine cover.
- ПРИМЕЧАНИЕ:
- Lift the area around the clips on the top of the engine cover.
- Do not suddenly lift the engine cover. Remove the cover slowly by detaching the clips on by one.
- Lift area A shown in the illustration particularly slowly because there is a cowl on the top of the area around A. Failure to do so may damage the cover.
| 2. REMOVE UPPER RADIATOR AIR DEFLECTOR |
Remove the 6 clips and upper radiator air deflector.
| 3. REMOVE NO. 1 ENGINE UNDER COVER |
| 4. REMOVE ENGINE UNDER COVER REAR RH |
| 5. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH |
Выверните 4 болта и снимите правое усиление элемента передней подвески.
Using SST and a 22 mm wrench, rotate the tensioner pulley counterclockwise to loosen the belt tension. Then remove the belt.
- SST
- 09216-42010
- ПРИМЕЧАНИЕ:
- Make sure that SST is installed as shown in the illustration. If not, SST and/or the belt may not be able to be removed.
- ПРЕДОСТЕРЕЖЕНИЕ:
- Be careful as the wrench only fits loosely on the belt tensioner tool set point. The wrench may come off the set point and cause injuries.
- Be careful that your hands do not become jammed between parts such as the belt, pulleys, etc.
